Hi Claudiu, > -----Original Message----- > From: Claudiu <claudiu.beznea@xxxxxxxxx> > Sent: Wednesday, March 20, 2024 10:43 AM > Subject: [PATCH v3 2/2] pinctrl: renesas: rzg2l: Configure the interrupt type on resume > > From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> > > Commit dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time") removed > the setup of TINT from rzg2l_irqc_irq_enable(). To address the spourious interrupt issue the setup of > TINT has been moved in rzg2l_tint_set_edge() though rzg2l_disable_tint_and_set_tint_source(). With > this, the interrupts are not properly re-configured after a suspend-to-RAM cycle. To address this issue > and avoid spurious interrupts while resumming set the interrupt type before enabling it. Just a question, Previously you don't save/restore irq_type() register during suspend/resume()?? After STR, any way we will lose that information. Cheers, Biju > > Fixes: dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time") > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> > --- > drivers/pinctrl/renesas/pinctrl-rzg2l.c | 22 ++++++++++++---------- > 1 file changed, 12 insertions(+), 10 deletions(-) > > diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c > index 93916553bcc7..4fee3b0e6c5e 100644 > --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c > +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c > @@ -2045,7 +2045,9 @@ static void rzg2l_gpio_irq_restore(struct rzg2l_pinctrl *pctrl) > > for (unsigned int i = 0; i < RZG2L_TINT_MAX_INTERRUPT; i++) { > struct irq_data *data; > + unsigned long flags; > unsigned int virq; > + int ret; > > if (!pctrl->hwirq[i]) > continue; > @@ -2063,17 +2065,17 @@ static void rzg2l_gpio_irq_restore(struct rzg2l_pinctrl *pctrl) > continue; > } > > - if (!irqd_irq_disabled(data)) { > - unsigned long flags; > - > - /* > - * This has to be atomically executed to protect against a concurrent > - * interrupt. > - */ > - raw_spin_lock_irqsave(&pctrl->lock.rlock, flags); > + /* > + * This has to be atomically executed to protect against a concurrent > + * interrupt. > + */ > + raw_spin_lock_irqsave(&pctrl->lock.rlock, flags); > + ret = rzg2l_gpio_irq_set_type(data, irqd_get_trigger_type(data)); > + if (ret) > + dev_crit(pctrl->dev, "Failed to set IRQ type for virq=%u\n", virq); > + else if (!irqd_irq_disabled(data)) > rzg2l_gpio_irq_enable(data); > - raw_spin_unlock_irqrestore(&pctrl->lock.rlock, flags); > - } > + raw_spin_unlock_irqrestore(&pctrl->lock.rlock, flags); > } > } > > -- > 2.39.2