[PATCH v2] pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The register offset to disable the internal pull-down of GPIOR~T is 0x630
instead of 0x620, as specified in the Ast2600 datasheet v15
The datasheet can download from the official Aspeed website.

Fixes: 15711ba6ff19 ("pinctrl: aspeed-g6: Add AST2600 pinconf support")
Signed-off-by: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
---
 drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 34 +++++++++++-----------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
index d376fa7114d1..029efe16f8cc 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
@@ -43,7 +43,7 @@
 #define SCU614		0x614 /* Disable GPIO Internal Pull-Down #1 */
 #define SCU618		0x618 /* Disable GPIO Internal Pull-Down #2 */
 #define SCU61C		0x61c /* Disable GPIO Internal Pull-Down #3 */
-#define SCU620		0x620 /* Disable GPIO Internal Pull-Down #4 */
+#define SCU630		0x630 /* Disable GPIO Internal Pull-Down #4 */
 #define SCU634		0x634 /* Disable GPIO Internal Pull-Down #5 */
 #define SCU638		0x638 /* Disable GPIO Internal Pull-Down #6 */
 #define SCU690		0x690 /* Multi-function Pin Control #24 */
@@ -2495,38 +2495,38 @@ static struct aspeed_pin_config aspeed_g6_configs[] = {
 	ASPEED_PULL_DOWN_PINCONF(D14, SCU61C, 0),
 
 	/* GPIOS7 */
-	ASPEED_PULL_DOWN_PINCONF(T24, SCU620, 23),
+	ASPEED_PULL_DOWN_PINCONF(T24, SCU630, 23),
 	/* GPIOS6 */
-	ASPEED_PULL_DOWN_PINCONF(P23, SCU620, 22),
+	ASPEED_PULL_DOWN_PINCONF(P23, SCU630, 22),
 	/* GPIOS5 */
-	ASPEED_PULL_DOWN_PINCONF(P24, SCU620, 21),
+	ASPEED_PULL_DOWN_PINCONF(P24, SCU630, 21),
 	/* GPIOS4 */
-	ASPEED_PULL_DOWN_PINCONF(R26, SCU620, 20),
+	ASPEED_PULL_DOWN_PINCONF(R26, SCU630, 20),
 	/* GPIOS3*/
-	ASPEED_PULL_DOWN_PINCONF(R24, SCU620, 19),
+	ASPEED_PULL_DOWN_PINCONF(R24, SCU630, 19),
 	/* GPIOS2 */
-	ASPEED_PULL_DOWN_PINCONF(T26, SCU620, 18),
+	ASPEED_PULL_DOWN_PINCONF(T26, SCU630, 18),
 	/* GPIOS1 */
-	ASPEED_PULL_DOWN_PINCONF(T25, SCU620, 17),
+	ASPEED_PULL_DOWN_PINCONF(T25, SCU630, 17),
 	/* GPIOS0 */
-	ASPEED_PULL_DOWN_PINCONF(R23, SCU620, 16),
+	ASPEED_PULL_DOWN_PINCONF(R23, SCU630, 16),
 
 	/* GPIOR7 */
-	ASPEED_PULL_DOWN_PINCONF(U26, SCU620, 15),
+	ASPEED_PULL_DOWN_PINCONF(U26, SCU630, 15),
 	/* GPIOR6 */
-	ASPEED_PULL_DOWN_PINCONF(W26, SCU620, 14),
+	ASPEED_PULL_DOWN_PINCONF(W26, SCU630, 14),
 	/* GPIOR5 */
-	ASPEED_PULL_DOWN_PINCONF(T23, SCU620, 13),
+	ASPEED_PULL_DOWN_PINCONF(T23, SCU630, 13),
 	/* GPIOR4 */
-	ASPEED_PULL_DOWN_PINCONF(U25, SCU620, 12),
+	ASPEED_PULL_DOWN_PINCONF(U25, SCU630, 12),
 	/* GPIOR3*/
-	ASPEED_PULL_DOWN_PINCONF(V26, SCU620, 11),
+	ASPEED_PULL_DOWN_PINCONF(V26, SCU630, 11),
 	/* GPIOR2 */
-	ASPEED_PULL_DOWN_PINCONF(V24, SCU620, 10),
+	ASPEED_PULL_DOWN_PINCONF(V24, SCU630, 10),
 	/* GPIOR1 */
-	ASPEED_PULL_DOWN_PINCONF(U24, SCU620, 9),
+	ASPEED_PULL_DOWN_PINCONF(U24, SCU630, 9),
 	/* GPIOR0 */
-	ASPEED_PULL_DOWN_PINCONF(V25, SCU620, 8),
+	ASPEED_PULL_DOWN_PINCONF(V25, SCU630, 8),
 
 	/* GPIOX7 */
 	ASPEED_PULL_DOWN_PINCONF(AB10, SCU634, 31),
-- 
2.25.1





[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux