RE: [PATCH v1] pinctrl: pinctrl-aspeed-g6: correct the offset of SCU630

[Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@xxxxxxxxxx>]

> -----Original Message-----
> From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
> Sent: Wednesday, March 13, 2024 10:42 AM
> To: patrick@xxxxxxxxx; Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>; Linus
> Walleij <linus.walleij@xxxxxxxxxx>; Joel Stanley <joel@xxxxxxxxx>
> Cc: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@xxxxxxxxxx>;
> linux-aspeed@xxxxxxxxxxxxxxxx; openbmc@xxxxxxxxxxxxxxxx;
> linux-gpio@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx
> Subject: [PATCH v1] pinctrl: pinctrl-aspeed-g6: correct the offset of SCU630
> 
> Description:
> Correct the offset of "Disable GPIO Internal Pull-Down #4" register that should
> be 630h according to the AST2620 datasheet.
> 
> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
> ---

Hi,
Please don't review this patch since ASPEED also provided the patch to
fix this issue.
Thanks!