[PATCH v3 2/2] dt-bindings: pinctrl: qcom: update functions to match with driver

[Tengfei Fan <quic_tengfan@xxxxxxxxxxx>]

Some functions were consolidated in the SM4450 pinctrl driver, but they
had not been updated in the binding file before the previous SM4450
pinctrl patch series was merged.
Update functions in this binding file to match with SM4450 pinctrl
driver. Some functions need to be consolidated and some functions need
to be removed.
The following functions are removed:
  - atest_char0, atest_char1, atest_char2, atest_char3
  - atest_usb00, atest_usb01, atest_usb02, atest_usb03
  - audio_ref
  - cci_async
  - cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4
  - cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3
  - coex_uart1
  - cri_trng0, cri_trng1
  - dbg_out
  - ddr_pxi0, ddr_pxi1
  - dp0_hot
  - gcc_gp1, gcc_gp2, gcc_gp3
  - ibi_i3c
  - jitter_bist
  - mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3
  - mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s2_data0,
    mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0, mi2s_mclk1
  - nav_gpio0, nav_gpio1, nav_gpio2
  - phase_flag0, phase_flag1, phase_flag10, phase_flag11, phase_flag12,
    phase_flag13, phase_flag14, phase_flag15, phase_flag16,
    phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
    phase_flag21, phase_flag22, phase_flag23, phase_flag24,
    phase_flag25, phase_flag26, phase_flag27, phase_flag28,
    phase_flag29, phase_flag3, phase_flag30, phase_flag31, phase_flag4,
    phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9
  - pll_bist, pll_clk
  - prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3
  - qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12,
    qdss_gpio13, qdss_gpio14, qdss_gpio15, qdss_gpio2, qdss_gpio3,
    qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7, qdss_gpio8,
    qdss_gpio9
  - qlink0_wmss
  - qup0_se5, qup0_se6, qup0_se7, qup1_se5, qup1_se6
  - sd_write
  - tb_trig
  - tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3
  - tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3
  - tsense_pwm1, tsense_pwm2
  - uim0_clk, uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
    uim1_present, uim1_reset
  - usb0_hs, usb0_phy
  - vsense_trigger

The following functions are added:
  - atest_char
  - atest_usb0
  - audio_ref_clk
  - cci
  - cci_async_in0
  - cmu_rng
  - coex_uart1_rx, coex_uart1_tx
  - dbg_out_clk
  - ddr_pxi0_test, ddr_pxi1_test
  - gcc_gp1_clk, gcc_gp2_clk, gcc_gp3_clk
  - ibi_i3c_qup0, ibi_i3c_qup1
  - jitter_bist_ref
  - mdp_vsync
  - nav
  - phase_flag
  - pll_bist_sync, pll_clk_aux
  - prng_rosc
  - qlink0_wmss_reset
  - sd_write_protect
  - tb_trig_sdc1, tb_trig_sdc2
  - tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout, tgu_ch3_trigout
  - tmess_prng
  - tsense_pwm1_out, tsense_pwm2_out
  - uim0, uim1
  - usb0_hs_ac, usb0_phy_ps
  - vsense_trigger_mirnat
  - wlan1_adc_dtest0, wlan1_adc_dtest1

Fixes: 7bf8b78f86db ("dt-bindings: pinctrl: qcom: Add SM4450 pinctrl")
Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
---
 .../bindings/pinctrl/qcom,sm4450-tlmm.yaml    | 52 +++++++------------
 1 file changed, 18 insertions(+), 34 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
index bb675c8ec220..1b941b276b3f 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
@@ -72,40 +72,24 @@ $defs:
         description:
           Specify the alternative function to be configured for the specified
           pins.
-        enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
-                atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02,
-                atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c,
-                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
-                cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng,
-                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
-                dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c,
-                jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
-                mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws,
-                mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0,
-                mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk,
-                phase_flag0, phase_flag1, phase_flag10, phase_flag11,
-                phase_flag12, phase_flag13, phase_flag14, phase_flag15,
-                phase_flag16, phase_flag17, phase_flag18, phase_flag19,
-                phase_flag2, phase_flag20, phase_flag21, phase_flag22,
-                phase_flag23, phase_flag24, phase_flag25, phase_flag26,
-                phase_flag27, phase_flag28, phase_flag29, phase_flag3,
-                phase_flag30, phase_flag31, phase_flag4, phase_flag5,
-                phase_flag6, phase_flag7, phase_flag8, phase_flag9,
-                pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2,
-                prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1,
-                qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
-                qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5,
-                qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
-                qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
-                qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss,
-                qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5,
-                qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
-                qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0,
-                tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
-                tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk,
-                uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
-                uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1,
-                vsense_trigger ]
+        enum: [ gpio, atest_char, atest_usb0, audio_ref_clk, cam_mclk,
+                cci_async_in0, cci_i2c, cci, cmu_rng, coex_uart1_rx,
+                coex_uart1_tx, cri_trng, dbg_out_clk, ddr_bist,
+                ddr_pxi0_test, ddr_pxi1_test, gcc_gp1_clk, gcc_gp2_clk,
+                gcc_gp3_clk, host2wlan_sol, ibi_i3c_qup0, ibi_i3c_qup1,
+                jitter_bist_ref, mdp_vsync0_out, mdp_vsync1_out,
+                mdp_vsync2_out, mdp_vsync3_out, mdp_vsync, nav,
+                pcie0_clk_req, phase_flag, pll_bist_sync, pll_clk_aux,
+                prng_rosc, qdss_cti_trig0, qdss_cti_trig1, qdss_gpio,
+                qlink0_enable, qlink0_request, qlink0_wmss_reset,
+                qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4,
+                qup1_se0, qup1_se1, qup1_se2, qup1_se2_l2, qup1_se3,
+                qup1_se4, sd_write_protect, tb_trig_sdc1, tb_trig_sdc2,
+                tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
+                tgu_ch3_trigout, tmess_prng, tsense_pwm1_out,
+                tsense_pwm2_out, uim0, uim1, usb0_hs_ac, usb0_phy_ps,
+                vfr_0_mira, vfr_0_mirb, vfr_1, vsense_trigger_mirnat,
+                wlan1_adc_dtest0, wlan1_adc_dtest1 ]
 
         required:
           - pins
-- 
2.17.1