Re: [PATCH v8] pinctrl: Add driver for Awinic AW9523/B I2C GPIO Expander

[Linus Walleij <linus.walleij@xxxxxxxxxx>]

On Tue, Mar 5, 2024 at 9:00 AM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
> On Fri, Mar 1, 2024 at 2:30 PM Linus Walleij <linus.walleij@xxxxxxxxxx> wrote:
> > From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
> >
> > The Awinic AW9523(B) is a multi-function I2C gpio expander in a
> > TQFN-24L package, featuring PWM (max 37mA per pin, or total max
> > power 3.2Watts) for LED driving capability.
> >
> > It has two ports with 8 pins per port (for a total of 16 pins),
> > configurable as either PWM with 1/256 stepping or GPIO input/output,
> > 1.8V logic input; each GPIO can be configured as input or output
> > independently from each other.
> >
> > This IC also has an internal interrupt controller, which is capable
> > of generating an interrupt for each GPIO, depending on the
> > configuration, and will raise an interrupt on the INTN pin to
> > advertise this to an external interrupt controller.
> >
> > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
> > Signed-off-by: David Bauer <mail@xxxxxxxxxxxxxxx>
> > Reported-by: kernel test robot <lkp@xxxxxxxxx>
>
> This "Reported-by" should not be here, especially since the issue
> reported[1] was not fixed, and is now in next[2].

Oops I dropped the tag.

> [1] https://lore.kernel.org/all/202106251415.3UY7htNp-lkp@xxxxxxxxx/
> [2] http://kisskb.ellerman.id.au/kisskb/buildresult/15135594/

I wonder what the problem is though since the driver
depends on OF && I2C...

Yours,
Linus Walleij