[PATCH v2 28/30] MIPS: mobileye: eyeq5: add two GPIO bank nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This platform uses the same GPIO controller as Nomadik. It however has
its own pinconf & pinmux controller. EyeQ5 is the first platform to use
gpio-nomadik independently from pinctrl-nomadik.

Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
---
 arch/mips/boot/dts/mobileye/eyeq5.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
index 8d4f65ec912d..0f18ac73620b 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
+++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
@@ -158,6 +158,32 @@ timer {
 				clocks = <&core0_clk>;
 			};
 		};
+
+		gpio0: gpio@1400000 {
+			compatible = "mobileye,eyeq5-gpio";
+			reg = <0x0 0x1400000 0x0 0x1000>;
+			gpio-bank = <0>;
+			ngpios = <29>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 14 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@1500000 {
+			compatible = "mobileye,eyeq5-gpio";
+			reg = <0x0 0x1500000 0x0 0x1000>;
+			gpio-bank = <1>;
+			ngpios = <23>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 14 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 };
 

-- 
2.44.0





[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux