Re: [PATCH v3 17/18] PCI: j721e: add reset GPIO to struct j721e_pcie

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 15, 2024 at 04:18:02PM +0100, Thomas Richard wrote:
> From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
> 
> Add reset GPIO to struct j721e_pcie, so it can be used at suspend and
> resume stages.

...

>  	case PCI_MODE_RC:
> -		gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> -		if (IS_ERR(gpiod)) {
> -			ret = PTR_ERR(gpiod);
> +		pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> +		if (IS_ERR(pcie->reset_gpio)) {
> +			ret = PTR_ERR(pcie->reset_gpio);
>  			if (ret != -EPROBE_DEFER)
>  				dev_err(dev, "Failed to get reset GPIO\n");
>  			goto err_get_sync;
> @@ -504,9 +504,9 @@ static int j721e_pcie_probe(struct platform_device *pdev)
>  		 * mode is selected while enabling the PHY. So deassert PERST#
>  		 * after 100 us.
>  		 */
> -		if (gpiod) {
> +		if (pcie->reset_gpio) {
>  			usleep_range(100, 200);
> -			gpiod_set_value_cansleep(gpiod, 1);
> +			gpiod_set_value_cansleep(pcie->reset_gpio, 1);
>  		}

Instead of all this, just add one line assignment. Moreover, before or after
this patch refactor the code to use ret = dev_err_probe(...); pattern that
eliminates those deferral probe checks.


-- 
With Best Regards,
Andy Shevchenko






[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux