On Tue, 9 Jan 2024 at 15:39, Wenhua Lin <Wenhua.Lin@xxxxxxxxxx> wrote:
>
> The raw interrupt status of eic maybe set before the interrupt is enabled,
> since the eic interrupt has a latch function, which would trigger the
> interrupt event once enabled it from user side. To solve this problem,
> interrupts generated before setting the interrupt trigger type are ignored.
>
> Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support")
> Signed-off-by: Wenhua Lin <Wenhua.Lin@xxxxxxxxxx>
Acked-by: Chunyan Zhang <zhang.lyra@xxxxxxxxx>
> ---
> drivers/gpio/gpio-eic-sprd.c | 32 ++++++++++++++++++++++++++++----
> 1 file changed, 28 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpio/gpio-eic-sprd.c b/drivers/gpio/gpio-eic-sprd.c
> index be7f2fa5aa7b..806b88d8dfb7 100644
> --- a/drivers/gpio/gpio-eic-sprd.c
> +++ b/drivers/gpio/gpio-eic-sprd.c
> @@ -330,20 +330,27 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
> switch (flow_type) {
> case IRQ_TYPE_LEVEL_HIGH:
> sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1);
> + sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1);
> break;
> case IRQ_TYPE_LEVEL_LOW:
> sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
> + sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1);
> break;
> case IRQ_TYPE_EDGE_RISING:
> case IRQ_TYPE_EDGE_FALLING:
> case IRQ_TYPE_EDGE_BOTH:
> state = sprd_eic_get(chip, offset);
> - if (state)
> + if (state) {
> sprd_eic_update(chip, offset,
> SPRD_EIC_DBNC_IEV, 0);
> - else
> + sprd_eic_update(chip, offset,
> + SPRD_EIC_DBNC_IC, 1);
> + } else {
> sprd_eic_update(chip, offset,
> SPRD_EIC_DBNC_IEV, 1);
> + sprd_eic_update(chip, offset,
> + SPRD_EIC_DBNC_IC, 1);
> + }
> break;
> default:
> return -ENOTSUPP;
> @@ -355,20 +362,27 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
> switch (flow_type) {
> case IRQ_TYPE_LEVEL_HIGH:
> sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0);
> + sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1);
> break;
> case IRQ_TYPE_LEVEL_LOW:
> sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1);
> + sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1);
> break;
> case IRQ_TYPE_EDGE_RISING:
> case IRQ_TYPE_EDGE_FALLING:
> case IRQ_TYPE_EDGE_BOTH:
> state = sprd_eic_get(chip, offset);
> - if (state)
> + if (state) {
> sprd_eic_update(chip, offset,
> SPRD_EIC_LATCH_INTPOL, 0);
> - else
> + sprd_eic_update(chip, offset,
> + SPRD_EIC_LATCH_INTCLR, 1);
> + } else {
> sprd_eic_update(chip, offset,
> SPRD_EIC_LATCH_INTPOL, 1);
> + sprd_eic_update(chip, offset,
> + SPRD_EIC_LATCH_INTCLR, 1);
> + }
> break;
> default:
> return -ENOTSUPP;
> @@ -382,29 +396,34 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
> sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
> sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
> sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
> + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
> irq_set_handler_locked(data, handle_edge_irq);
> break;
> case IRQ_TYPE_EDGE_FALLING:
> sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
> sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
> sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
> + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
> irq_set_handler_locked(data, handle_edge_irq);
> break;
> case IRQ_TYPE_EDGE_BOTH:
> sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
> sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 1);
> + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
> irq_set_handler_locked(data, handle_edge_irq);
> break;
> case IRQ_TYPE_LEVEL_HIGH:
> sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
> sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
> sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
> + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
> irq_set_handler_locked(data, handle_level_irq);
> break;
> case IRQ_TYPE_LEVEL_LOW:
> sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
> sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
> sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
> + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
> irq_set_handler_locked(data, handle_level_irq);
> break;
> default:
> @@ -417,29 +436,34 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
> sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
> sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
> sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
> + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
> irq_set_handler_locked(data, handle_edge_irq);
> break;
> case IRQ_TYPE_EDGE_FALLING:
> sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
> sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
> sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
> + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
> irq_set_handler_locked(data, handle_edge_irq);
> break;
> case IRQ_TYPE_EDGE_BOTH:
> sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
> sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 1);
> + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
> irq_set_handler_locked(data, handle_edge_irq);
> break;
> case IRQ_TYPE_LEVEL_HIGH:
> sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
> sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
> sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
> + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
> irq_set_handler_locked(data, handle_level_irq);
> break;
> case IRQ_TYPE_LEVEL_LOW:
> sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
> sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
> sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
> + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
> irq_set_handler_locked(data, handle_level_irq);
> break;
> default:
> --
> 2.17.1
>
Re: [PATCH V4 1/2] gpio: eic-sprd: Clear interrupt after set the interrupt type
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH V4 1/2] gpio: eic-sprd: Clear interrupt after set the interrupt type
- From: Chunyan Zhang <zhang.lyra@xxxxxxxxx>
- Date: Mon, 22 Jan 2024 18:00:52 +0800
- In-reply-to: <20240109073849.10791-2-Wenhua.Lin@unisoc.com>
- References: <20240109073849.10791-1-Wenhua.Lin@unisoc.com> <20240109073849.10791-2-Wenhua.Lin@unisoc.com>
- References:
- Prev by Date: Re: [PATCH v2 0/9] Documentation: gpio: add character device userspace API documentation
- Next by Date: Re: [PATCH v12 2/2] iio: adc: ad7173: add AD7173 driver
- Previous by thread: [PATCH V4 1/2] gpio: eic-sprd: Clear interrupt after set the interrupt type
- Next by thread: [PATCH V4 2/2] gpio: eic-sprd: Optimize the calculation method of eic number
- Index(es):
 |