RE: [PATCH v5 0/2] Add gpio driver support for Realtek DHC SoCs

[TY_Chang[張子逸] <tychang@xxxxxxxxxxx>]

Hi Bartosz,

>On Thu, Dec 28, 2023 at 11:48 AM Tzuyi Chang <tychang@xxxxxxxxxxx>
>wrote:
>>
>> These patches add the bindings and the gpio driver for Realtek
>> DHC(Digital Home Center) RTD SoCs, including RTD1295, RTD1395,
>> RTD1619, RTD1319, RTD1619B, RTD1319D and RTD1315E.
>>
>> Change log:
>> v4->v5:
>> 1. Add more description in the Kconfig.
>> 2. Add comment for the counter-intuitive number 31.
>> 3. Convert to use cleanup API and module_platform_driver() macro.
>> 4. Simplify some of the code as suggested in patch v4.
>> v3->v4:
>> 1. Arrange the compatible list in alphanumerical order.
>> 2. Remove the size check for the offset array.
>> 3. Add the debounce callback.
>> 4. Conducted a review of the critical section, employing raw_spinlock_t for
>locking purposes.
>> 5. Add gpiochip_enable_irq/gpiochip_disable_irq to fulfill the immutability
>requirements.
>> 6. Use irqd_to_hwirq to get hwirq.
>> v2->v3:
>> 1. Remove generic compatible and use SoC-specific compatible instead.
>> 2. Add the missing descriptions for the rtd_gpio_info structure members.
>> 3. Assign gpio_chip fwnode.
>> v1->v2:
>> 1. Add description for DHC RTD SoCs in the bindings.
>> 2. Revise the compatible names in the bindings.
>> 3. Transitioned from OF API to platform_device API.
>> 4. Use u8 for the offset array within the rtd_gpio_info structure.
>> 5. Record the size of each array within the rtd_gpio_info structure and
>>    implement checks to prevent out-of-bounds access.
>> 6. Use GPIOLIB_IRQCHIP helpers to register interrupts.
>> 7. Use dynamic allocation for GPIO base.
>>
>> Tzuyi Chang (2):
>>   dt-bindings: gpio: realtek: Add realtek,rtd-gpio
>>   Add GPIO support for Realtek DHC(Digital Home Center) RTD SoCs.
>>
>>  .../bindings/gpio/realtek,rtd-gpio.yaml       |  69 ++
>>  drivers/gpio/Kconfig                          |  13 +
>>  drivers/gpio/Makefile                         |   1 +
>>  drivers/gpio/gpio-rtd.c                       | 604
>++++++++++++++++++
>>  4 files changed, 687 insertions(+)
>>  create mode 100644
>> Documentation/devicetree/bindings/gpio/realtek,rtd-gpio.yaml
>>  create mode 100644 drivers/gpio/gpio-rtd.c
>>
>> --
>> 2.43.0
>>
>
>I applied this series. For the future: the commit subject should have the "gpio:
>rtd: ..." prefix. I added it this time.
>

Thank you. I'll make sure to take note of it next time.

Thanks,
Tzuyi Chang