The initialization state of the eic module is a high level trigger. If it is currently a high level, the interrupt condition is met at this time, and the eic interrupt has a latch capability, which will cause an interrupt to occur after booting. To avoid this, When setting the eic interrupt trigger type, clear the interrupt once. Signed-off-by: Wenhua Lin <Wenhua.Lin@xxxxxxxxxx> --- drivers/gpio/gpio-eic-sprd.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/gpio/gpio-eic-sprd.c b/drivers/gpio/gpio-eic-sprd.c index bdcb3510a208..e492157e5154 100644 --- a/drivers/gpio/gpio-eic-sprd.c +++ b/drivers/gpio/gpio-eic-sprd.c @@ -384,29 +384,34 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type) sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0); sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0); sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1); + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1); irq_set_handler_locked(data, handle_edge_irq); break; case IRQ_TYPE_EDGE_FALLING: sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0); sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0); sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0); + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1); irq_set_handler_locked(data, handle_edge_irq); break; case IRQ_TYPE_EDGE_BOTH: sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0); sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 1); + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1); irq_set_handler_locked(data, handle_edge_irq); break; case IRQ_TYPE_LEVEL_HIGH: sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0); sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1); sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1); + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1); irq_set_handler_locked(data, handle_level_irq); break; case IRQ_TYPE_LEVEL_LOW: sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0); sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1); sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0); + sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1); irq_set_handler_locked(data, handle_level_irq); break; default: @@ -419,29 +424,34 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type) sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0); sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0); sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1); + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1); irq_set_handler_locked(data, handle_edge_irq); break; case IRQ_TYPE_EDGE_FALLING: sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0); sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0); sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0); + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1); irq_set_handler_locked(data, handle_edge_irq); break; case IRQ_TYPE_EDGE_BOTH: sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0); sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 1); + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1); irq_set_handler_locked(data, handle_edge_irq); break; case IRQ_TYPE_LEVEL_HIGH: sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0); sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1); sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1); + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1); irq_set_handler_locked(data, handle_level_irq); break; case IRQ_TYPE_LEVEL_LOW: sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0); sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1); sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0); + sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1); irq_set_handler_locked(data, handle_level_irq); break; default: -- 2.17.1