Re: [PATCH 4/7] dt-bindings: firmware: arm,scmi: support pinctrl protocol

[Marco Felsch <m.felsch@xxxxxxxxxxxxxx>]

On 23-12-20, Peng Fan wrote:
> > Subject: Re: [PATCH 4/7] dt-bindings: firmware: arm,scmi: support pinctrl
> > protocol
> > 
> > Hi Peng,
> > 
> > On 23-12-15, Peng Fan (OSS) wrote:
> > > From: Peng Fan <peng.fan@xxxxxxx>
> > >
> > > Add SCMI v3.2 pinctrl protocol bindings and example.
> > >
> > > Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> > > ---
> > >  .../devicetree/bindings/firmware/arm,scmi.yaml     | 99
> > ++++++++++++++++++++++
> > >  1 file changed, 99 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > > b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > > index 4591523b51a0..bfd2b6a89979 100644
> > > --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > > +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > > @@ -247,6 +247,85 @@ properties:
> > >        reg:
> > >          const: 0x18
> > >
> > > +  protocol@19:
> > 
> > ...
> > 
> > > @@ -401,6 +480,26 @@ examples:
> > >              scmi_powercap: protocol@18 {
> > >                  reg = <0x18>;
> > >              };
> > > +
> > > +            scmi_pinctrl: protocol@19 {
> > > +                reg = <0x19>;
> > > +                #pinctrl-cells = <0>;
> > > +
> > > +                i2c2-pins {
> > > +                    groups = "i2c2_a", "i2c2_b";
> > > +                    function = "i2c2";
> > > +                };
> > > +
> > > +                mdio-pins {
> > > +                    groups = "avb_mdio";
> > > +                    drive-strength = <24>;
> > > +                };
> > > +
> > > +                keys_pins: keys-pins {
> > > +                    pins = "GP_5_17", "GP_5_20", "GP_5_22", "GP_2_1";
> > > +                    bias-pull-up;
> > > +                };
> > > +            };
> > 
> > This example is different to the one you mentioned within the cover-letter. I
> > didn't checked all patches just want to ask which API will be implemented by
> > this patchset?
> 
> I kept this change since it was tested by Oleksii, but anyway i.MX not use these.
> 
> The API, I suppose you are asking about this?
> static const struct pinctrl_ops pinctrl_scmi_pinctrl_ops = {                                        
>         .get_groups_count = pinctrl_scmi_get_groups_count,                                          
>         .get_group_name = pinctrl_scmi_get_group_name,                                              
>         .get_group_pins = pinctrl_scmi_get_group_pins,                                              
> #ifdef CONFIG_OF                                                                                    
>         .dt_node_to_map = pinconf_generic_dt_node_to_map_all,                                       
>         .dt_free_map = pinconf_generic_dt_free_map,                                                 
> #endif                                                                                              
> };
> 
> static const struct pinctrl_ops pinctrl_scmi_imx_pinctrl_ops = {                                    
>         .get_groups_count = pinctrl_scmi_get_groups_count,                                          
>         .get_group_name = pinctrl_scmi_get_group_name,                                              
>         .get_group_pins = pinctrl_scmi_get_group_pins,                                              
> #ifdef CONFIG_OF                                                                                    
>         .dt_node_to_map = pinctrl_scmi_imx_dt_node_to_map,                                          
>         .dt_free_map = pinconf_generic_dt_free_map,                                                 
> #endif                                                                                              
> };

I see, thanks for the clarification. In short: the i.MX SMCI pinctrl
DT-API is the same as the non-SCMI pinctrl API since the dt_node_to_map
will convert it.

Regards,
  Marco