From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> Pull the array of GPIO descriptors into struct gpio_device as a flexible array and use __counted_by() to control its size. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> --- drivers/gpio/gpiolib.c | 14 ++---- drivers/gpio/gpiolib.h | 98 +++++++++++++++++++++--------------------- 2 files changed, 52 insertions(+), 60 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index c9ca809b55de..7ebeb5bb7918 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/mutex.h> #include <linux/of.h> +#include <linux/overflow.h> #include <linux/pinctrl/consumer.h> #include <linux/seq_file.h> #include <linux/slab.h> @@ -669,7 +670,6 @@ static void gpiodev_release(struct device *dev) ida_free(&gpio_ida, gdev->id); kfree_const(gdev->label); - kfree(gdev->descs); kfree(gdev); } @@ -831,7 +831,7 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data, * First: allocate and populate the internal stat container, and * set up the struct device. */ - gdev = kzalloc(sizeof(*gdev), GFP_KERNEL); + gdev = kzalloc(struct_size(gdev, descs, gc->ngpio), GFP_KERNEL); if (!gdev) return -ENOMEM; gdev->dev.bus = &gpio_bus_type; @@ -873,16 +873,10 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data, if (ret) goto err_free_dev_name; - gdev->descs = kcalloc(gc->ngpio, sizeof(*gdev->descs), GFP_KERNEL); - if (!gdev->descs) { - ret = -ENOMEM; - goto err_free_dev_name; - } - gdev->label = kstrdup_const(gc->label ?: "unknown", GFP_KERNEL); if (!gdev->label) { ret = -ENOMEM; - goto err_free_descs; + goto err_free_dev_name; } gdev->ngpio = gc->ngpio; @@ -1021,8 +1015,6 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data, list_del(&gdev->list); err_free_label: kfree_const(gdev->label); -err_free_descs: - kfree(gdev->descs); err_free_dev_name: kfree(dev_name(&gdev->dev)); err_free_ida: diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h index 0ce7451a6b24..d65ee94d88f8 100644 --- a/drivers/gpio/gpiolib.h +++ b/drivers/gpio/gpiolib.h @@ -21,6 +21,53 @@ #define GPIOCHIP_NAME "gpiochip" +/** + * struct gpio_desc - Opaque descriptor for a GPIO + * + * @gdev: Pointer to the parent GPIO device + * @flags: Binary descriptor flags + * @label: Name of the consumer + * @name: Line name + * @hog: Pointer to the device node that hogs this line (if any) + * + * These are obtained using gpiod_get() and are preferable to the old + * integer-based handles. + * + * Contrary to integers, a pointer to a &struct gpio_desc is guaranteed to be + * valid until the GPIO is released. + */ +struct gpio_desc { + struct gpio_device *gdev; + unsigned long flags; +/* flag symbols are bit numbers */ +#define FLAG_REQUESTED 0 +#define FLAG_IS_OUT 1 +#define FLAG_EXPORT 2 /* protected by sysfs_lock */ +#define FLAG_SYSFS 3 /* exported via /sys/class/gpio/control */ +#define FLAG_ACTIVE_LOW 6 /* value has active low */ +#define FLAG_OPEN_DRAIN 7 /* Gpio is open drain type */ +#define FLAG_OPEN_SOURCE 8 /* Gpio is open source type */ +#define FLAG_USED_AS_IRQ 9 /* GPIO is connected to an IRQ */ +#define FLAG_IRQ_IS_ENABLED 10 /* GPIO is connected to an enabled IRQ */ +#define FLAG_IS_HOGGED 11 /* GPIO is hogged */ +#define FLAG_TRANSITORY 12 /* GPIO may lose value in sleep or reset */ +#define FLAG_PULL_UP 13 /* GPIO has pull up enabled */ +#define FLAG_PULL_DOWN 14 /* GPIO has pull down enabled */ +#define FLAG_BIAS_DISABLE 15 /* GPIO has pull disabled */ +#define FLAG_EDGE_RISING 16 /* GPIO CDEV detects rising edge events */ +#define FLAG_EDGE_FALLING 17 /* GPIO CDEV detects falling edge events */ +#define FLAG_EVENT_CLOCK_REALTIME 18 /* GPIO CDEV reports REALTIME timestamps in events */ +#define FLAG_EVENT_CLOCK_HTE 19 /* GPIO CDEV reports hardware timestamps in events */ + + /* Connection label */ + const char *label; + /* Name of the GPIO */ + const char *name; +#ifdef CONFIG_OF_DYNAMIC + struct device_node *hog; +#endif +}; + /** * struct gpio_device - internal state container for GPIO devices * @dev: the GPIO device struct @@ -31,7 +78,6 @@ * @owner: helps prevent removal of modules exporting active GPIOs * @chip: pointer to the corresponding gpiochip, holding static * data for this device - * @descs: array of ngpio descriptors. * @ngpio: the number of GPIO lines on this GPIO device, equal to the size * of the @descs array. * @base: GPIO base in the DEPRECATED global Linux GPIO numberspace, assigned @@ -48,6 +94,7 @@ * user-space operations when the device gets unregistered during * a hot-unplug event * @pin_ranges: range of pins served by the GPIO driver + * @descs: array of ngpio descriptors. * * This state container holds most of the runtime variable data * for a GPIO device and can hold references and live on after the @@ -61,7 +108,6 @@ struct gpio_device { struct device *mockdev; struct module *owner; struct gpio_chip *chip; - struct gpio_desc *descs; int base; u16 ngpio; const char *label; @@ -80,6 +126,7 @@ struct gpio_device { */ struct list_head pin_ranges; #endif + struct gpio_desc descs[] __counted_by(ngpio); }; static inline struct gpio_device *to_gpio_device(struct device *dev) @@ -141,53 +188,6 @@ extern struct mutex gpio_devices_lock; void gpiod_line_state_notify(struct gpio_desc *desc, unsigned long action); -/** - * struct gpio_desc - Opaque descriptor for a GPIO - * - * @gdev: Pointer to the parent GPIO device - * @flags: Binary descriptor flags - * @label: Name of the consumer - * @name: Line name - * @hog: Pointer to the device node that hogs this line (if any) - * - * These are obtained using gpiod_get() and are preferable to the old - * integer-based handles. - * - * Contrary to integers, a pointer to a &struct gpio_desc is guaranteed to be - * valid until the GPIO is released. - */ -struct gpio_desc { - struct gpio_device *gdev; - unsigned long flags; -/* flag symbols are bit numbers */ -#define FLAG_REQUESTED 0 -#define FLAG_IS_OUT 1 -#define FLAG_EXPORT 2 /* protected by sysfs_lock */ -#define FLAG_SYSFS 3 /* exported via /sys/class/gpio/control */ -#define FLAG_ACTIVE_LOW 6 /* value has active low */ -#define FLAG_OPEN_DRAIN 7 /* Gpio is open drain type */ -#define FLAG_OPEN_SOURCE 8 /* Gpio is open source type */ -#define FLAG_USED_AS_IRQ 9 /* GPIO is connected to an IRQ */ -#define FLAG_IRQ_IS_ENABLED 10 /* GPIO is connected to an enabled IRQ */ -#define FLAG_IS_HOGGED 11 /* GPIO is hogged */ -#define FLAG_TRANSITORY 12 /* GPIO may lose value in sleep or reset */ -#define FLAG_PULL_UP 13 /* GPIO has pull up enabled */ -#define FLAG_PULL_DOWN 14 /* GPIO has pull down enabled */ -#define FLAG_BIAS_DISABLE 15 /* GPIO has pull disabled */ -#define FLAG_EDGE_RISING 16 /* GPIO CDEV detects rising edge events */ -#define FLAG_EDGE_FALLING 17 /* GPIO CDEV detects falling edge events */ -#define FLAG_EVENT_CLOCK_REALTIME 18 /* GPIO CDEV reports REALTIME timestamps in events */ -#define FLAG_EVENT_CLOCK_HTE 19 /* GPIO CDEV reports hardware timestamps in events */ - - /* Connection label */ - const char *label; - /* Name of the GPIO */ - const char *name; -#ifdef CONFIG_OF_DYNAMIC - struct device_node *hog; -#endif -}; - #define gpiod_not_found(desc) (IS_ERR(desc) && PTR_ERR(desc) == -ENOENT) int gpiod_request(struct gpio_desc *desc, const char *label); -- 2.40.1