[PATCH v2 1/1] backlight: hx8357: Convert to agnostic GPIO API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The of_gpio.h is going to be removed. In preparation of that convert
the driver to the agnostic API.

Reviewed-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
Fixes: fbbbcd177a27 ("gpiolib: of: add quirk for locating reset lines with legacy bindings")
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
v2: collected tags (Linus, Daniel), added Fixes tag (Linus)
 drivers/gpio/gpiolib-of.c        |  4 +-
 drivers/video/backlight/hx8357.c | 74 ++++++++++----------------------
 2 files changed, 24 insertions(+), 54 deletions(-)

diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index 402f7d99b0c1..e7770eedd146 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -184,7 +184,7 @@ static void of_gpio_try_fixup_polarity(const struct device_node *np,
 		const char *propname;
 		bool active_high;
 	} gpios[] = {
-#if !IS_ENABLED(CONFIG_LCD_HX8357)
+#if IS_ENABLED(CONFIG_LCD_HX8357)
 		/*
 		 * Himax LCD controllers used incorrectly named
 		 * "gpios-reset" property and also specified wrong
@@ -478,7 +478,7 @@ static struct gpio_desc *of_find_gpio_rename(struct device_node *np,
 		 */
 		const char *compatible;
 	} gpios[] = {
-#if !IS_ENABLED(CONFIG_LCD_HX8357)
+#if IS_ENABLED(CONFIG_LCD_HX8357)
 		/* Himax LCD controllers used "gpios-reset" */
 		{ "reset",	"gpios-reset",	"himax,hx8357" },
 		{ "reset",	"gpios-reset",	"himax,hx8369" },
diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
index f76d2469d490..d7298376cf74 100644
--- a/drivers/video/backlight/hx8357.c
+++ b/drivers/video/backlight/hx8357.c
@@ -6,11 +6,11 @@
  */
 
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/lcd.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 #include <linux/spi/spi.h>
 
 #define HX8357_NUM_IM_PINS	3
@@ -83,11 +83,10 @@
 #define HX8369_SET_GAMMA_CURVE_RELATED		0xe0
 
 struct hx8357_data {
-	unsigned		im_pins[HX8357_NUM_IM_PINS];
-	unsigned		reset;
+	struct gpio_descs	*im_pins;
+	struct gpio_desc	*reset;
 	struct spi_device	*spi;
 	int			state;
-	bool			use_im_pins;
 };
 
 static u8 hx8357_seq_power[] = {
@@ -321,11 +320,11 @@ static void hx8357_lcd_reset(struct lcd_device *lcdev)
 	struct hx8357_data *lcd = lcd_get_data(lcdev);
 
 	/* Reset the screen */
-	gpio_set_value(lcd->reset, 1);
+	gpiod_set_value(lcd->reset, 0);
 	usleep_range(10000, 12000);
-	gpio_set_value(lcd->reset, 0);
+	gpiod_set_value(lcd->reset, 1);
 	usleep_range(10000, 12000);
-	gpio_set_value(lcd->reset, 1);
+	gpiod_set_value(lcd->reset, 0);
 
 	/* The controller needs 120ms to recover from reset */
 	msleep(120);
@@ -340,10 +339,10 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
 	 * Set the interface selection pins to SPI mode, with three
 	 * wires
 	 */
-	if (lcd->use_im_pins) {
-		gpio_set_value_cansleep(lcd->im_pins[0], 1);
-		gpio_set_value_cansleep(lcd->im_pins[1], 0);
-		gpio_set_value_cansleep(lcd->im_pins[2], 1);
+	if (lcd->im_pins) {
+		gpiod_set_value_cansleep(lcd->im_pins->desc[0], 1);
+		gpiod_set_value_cansleep(lcd->im_pins->desc[1], 0);
+		gpiod_set_value_cansleep(lcd->im_pins->desc[2], 1);
 	}
 
 	ret = hx8357_spi_write_array(lcdev, hx8357_seq_power,
@@ -580,6 +579,7 @@ MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
 
 static int hx8357_probe(struct spi_device *spi)
 {
+	struct device *dev = &spi->dev;
 	struct lcd_device *lcdev;
 	struct hx8357_data *lcd;
 	const struct of_device_id *match;
@@ -601,49 +601,19 @@ static int hx8357_probe(struct spi_device *spi)
 	if (!match || !match->data)
 		return -EINVAL;
 
-	lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0);
-	if (!gpio_is_valid(lcd->reset)) {
-		dev_err(&spi->dev, "Missing dt property: gpios-reset\n");
-		return -EINVAL;
-	}
+	lcd->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(lcd->reset))
+		return dev_err_probe(dev, PTR_ERR(lcd->reset), "failed to request reset GPIO\n");
+	gpiod_set_consumer_name(lcd->reset, "hx8357-reset");
 
-	ret = devm_gpio_request_one(&spi->dev, lcd->reset,
-				    GPIOF_OUT_INIT_HIGH,
-				    "hx8357-reset");
-	if (ret) {
-		dev_err(&spi->dev,
-			"failed to request gpio %d: %d\n",
-			lcd->reset, ret);
-		return -EINVAL;
-	}
+	lcd->im_pins = devm_gpiod_get_array_optional(dev, "im", GPIOD_OUT_LOW);
+	if (IS_ERR(lcd->im_pins))
+		return dev_err_probe(dev, PTR_ERR(lcd->im_pins), "failed to request im GPIOs\n");
+	if (lcd->im_pins->ndescs < HX8357_NUM_IM_PINS)
+		return dev_err_probe(dev, -EINVAL, "not enough im GPIOs\n");
 
-	if (of_property_present(spi->dev.of_node, "im-gpios")) {
-		lcd->use_im_pins = 1;
-
-		for (i = 0; i < HX8357_NUM_IM_PINS; i++) {
-			lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node,
-							    "im-gpios", i);
-			if (lcd->im_pins[i] == -EPROBE_DEFER) {
-				dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n");
-				return -EPROBE_DEFER;
-			}
-			if (!gpio_is_valid(lcd->im_pins[i])) {
-				dev_err(&spi->dev, "Missing dt property: im-gpios\n");
-				return -EINVAL;
-			}
-
-			ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i],
-						    GPIOF_OUT_INIT_LOW,
-						    "im_pins");
-			if (ret) {
-				dev_err(&spi->dev, "failed to request gpio %d: %d\n",
-					lcd->im_pins[i], ret);
-				return -EINVAL;
-			}
-		}
-	} else {
-		lcd->use_im_pins = 0;
-	}
+	for (i = 0; i < HX8357_NUM_IM_PINS; i++)
+		gpiod_set_consumer_name(lcd->im_pins->desc[i], "im_pins");
 
 	lcdev = devm_lcd_device_register(&spi->dev, "mxsfb", &spi->dev, lcd,
 					&hx8357_ops);
-- 
2.43.0.rc1.1.gbec44491f096





[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux