Re: [PATCH v3 1/2] dt-bindings: gpio: realtek: Add realtek,rtd-gpio

[Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>]

On 07/12/2023 11:07, TY Chang wrote:
> From: Tzuyi Chang <tychang@xxxxxxxxxxx>
> 
> Add the device tree bindings for the Realtek DHC(Digital Home Center)
> RTD SoCs GPIO controllers.
> 
> Signed-off-by: Tzuyi Chang <tychang@xxxxxxxxxxx>
> ---
> v2 to v3 change:
>     1. Remove generic compatible and use SoC-specific compatible instead.
> v1 to v2 change:
>     1. Add description for DHC RTD SoCs.
>     2. Revise the compatible names.
>     3. Add descriptions for reg and interrupts properties.
> ---
>  .../bindings/gpio/realtek,rtd-gpio.yaml       | 69 +++++++++++++++++++
>  1 file changed, 69 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/realtek,rtd-gpio.yaml
> 
> diff --git a/Documentation/devicetree/bindings/gpio/realtek,rtd-gpio.yaml b/Documentation/devicetree/bindings/gpio/realtek,rtd-gpio.yaml
> new file mode 100644
> index 000000000000..984e7dbd322e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/realtek,rtd-gpio.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2023 Realtek Semiconductor Corporation
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/realtek,rtd-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Realtek DHC GPIO controller
> +
> +maintainers:
> +  - Tzuyi Chang <tychang@xxxxxxxxxxx>
> +
> +description:
> +  The GPIO controller is designed for the Realtek DHC (Digital Home Center)
> +  RTD series SoC family, which are high-definition media processor SoCs.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - realtek,rtd1295-misc-gpio
> +      - realtek,rtd1295-iso-gpio
> +      - realtek,rtd1395-iso-gpio
> +      - realtek,rtd1619-iso-gpio
> +      - realtek,rtd1319-iso-gpio
> +      - realtek,rtd1619b-iso-gpio
> +      - realtek,rtd1319d-iso-gpio
> +      - realtek,rtd1315e-iso-gpio

If there is going to be resend, please order this list alphanumerically.

> +
> +  reg:
> +    items:
> +      - description: GPIO controller registers
> +      - description: GPIO interrupt registers
> +

...

> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    gpio@100 {
> +      compatible = "realtek,rtd1319d-iso-gpio";
> +      reg = <0x100 0x100>,
> +            <0x000 0x0b0>;

That's odd. Why order is decreasing? Isn't 0x0 the address of the SoC
(soc@0)?

It is, btw, 0x0, not 0x000. The same for 0x0b0 -> 0xb0, unless you want
to pad to full word.

Best regards,
Krzysztof