Re: [PATCH v5 4/4] pinctrl: qcom: sm4450: correct incorrect address offset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





在 12/2/2023 5:36 AM, Bjorn Andersson 写道:
On Thu, Nov 30, 2023 at 10:40:46AM +0800, Tengfei Fan wrote:
The address offset of 0x100000 is already provided in SM4450 DTSI, so
subtract 0x100000 from the offset which used by ufs and sdc.


As Konrad points out, please fix the broken patch, don't add a separate
fix in the same series.
Sure, I will do this as comments.

Suggested-by: Can Guo <quic_cang@xxxxxxxxxxx>

We unfortunately don't have a way to give credit to those providing
review feedback, so omit this when fixing patch #2.
Sure, I will omit this in next version patch series.

Regards,
Bjorn

Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
---
  drivers/pinctrl/qcom/pinctrl-sm4450.c | 16 ++++++++--------
  1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-sm4450.c b/drivers/pinctrl/qcom/pinctrl-sm4450.c
index 49e2e3a7a9cb..5496f955ed2a 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm4450.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm4450.c
@@ -936,14 +936,14 @@ static const struct msm_pingroup sm4450_groups[] = {
  	[133] = PINGROUP(133, _, phase_flag, _, _, _, _, _, _, _),
  	[134] = PINGROUP(134, tsense_pwm1_out, tsense_pwm2_out, _, _, _, _, _, _, _),
  	[135] = PINGROUP(135, _, phase_flag, _, _, _, _, _, _, _),
-	[136] = UFS_RESET(ufs_reset, 0x197000),
-	[137] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x18c004, 0, 0),
-	[138] = SDC_QDSD_PINGROUP(sdc1_clk, 0x18c000, 13, 6),
-	[139] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x18c000, 11, 3),
-	[140] = SDC_QDSD_PINGROUP(sdc1_data, 0x18c000, 9, 0),
-	[141] = SDC_QDSD_PINGROUP(sdc2_clk, 0x18f000, 14, 6),
-	[142] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x18f000, 11, 3),
-	[143] = SDC_QDSD_PINGROUP(sdc2_data, 0x18f000, 9, 0),
+	[136] = UFS_RESET(ufs_reset, 0x97000),
+	[137] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x8c004, 0, 0),
+	[138] = SDC_QDSD_PINGROUP(sdc1_clk, 0x8c000, 13, 6),
+	[139] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x8c000, 11, 3),
+	[140] = SDC_QDSD_PINGROUP(sdc1_data, 0x8c000, 9, 0),
+	[141] = SDC_QDSD_PINGROUP(sdc2_clk, 0x8f000, 14, 6),
+	[142] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x8f000, 11, 3),
+	[143] = SDC_QDSD_PINGROUP(sdc2_data, 0x8f000, 9, 0),
  };
static const struct msm_gpio_wakeirq_map sm4450_pdc_map[] = {
--
2.17.1


--
Thx and BRs,
Tengfei Fan




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux