Hi Claudiu, On Mon, Nov 20, 2023 at 8:01 AM Claudiu <claudiu.beznea@xxxxxxxxx> wrote: > From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> > > Add Ethernet nodes available on RZ/G3S (R9A08G045). > > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> Thanks for your patch! > --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi > +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi > @@ -149,6 +149,38 @@ sdhi2: mmc@11c20000 { > status = "disabled"; > }; > > + eth0: ethernet@11c30000 { > + compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth"; > + reg = <0 0x11c30000 0 0x10000>; > + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "mux", "fil", "arp_ns"; > + clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>, > + <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>, > + <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>; > + clock-names = "axi", "chi", "refclk"; > + resets = <&cpg R9A08G045_ETH0_RST_HW_N>; > + power-domains = <&cpg>; Perhaps add a default phy mode, like on other SoCs? phy-mode = "rgmii"'; Also missing: #address-cells = <1>; #size-cells = <0>; > + status = "disabled"; > + }; Same comments for eth1. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds