Add the SGPIO controller to the NPCM7xx devicetree Signed-off-by: Jim Liu <jim.t90615@xxxxxxxxx> --- Changes for v7: - no change Changes for v6: - remove bus-frequency - check with dtbs_check Changes for v5: - remove npcm8xx node Changes for v4: - add npcm8xx gpio node Changes for v3: - modify node name - modify in/out property name Changes for v2: - modify dts node --- .../dts/nuvoton/nuvoton-common-npcm7xx.dtsi | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi index 868454ae6bde..df91517a4842 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi +++ b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi @@ -372,6 +372,30 @@ &fanin12_pins &fanin13_pins status = "disabled"; }; + gpio8: gpio@101000 { + compatible = "nuvoton,npcm750-sgpio"; + reg = <0x101000 0x200>; + clocks = <&clk NPCM7XX_CLK_APB3>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + nuvoton,input-ngpios = <64>; + nuvoton,output-ngpios = <64>; + status = "disabled"; + }; + + gpio9: gpio@102000 { + compatible = "nuvoton,npcm750-sgpio"; + reg = <0x102000 0x200>; + clocks = <&clk NPCM7XX_CLK_APB3>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + nuvoton,input-ngpios = <64>; + nuvoton,output-ngpios = <64>; + status = "disabled"; + }; + i2c0: i2c@80000 { reg = <0x80000 0x1000>; compatible = "nuvoton,npcm750-i2c"; -- 2.25.1