[PATCH 0/3] pinctrl: qcom: Introduce Pinctrl/GPIO for SM8650

[Neil Armstrong <neil.armstrong@xxxxxxxxxx>]

The SM8650 Top Level Mode Multiplexer supports 211 GPIOs,
and the usual UFS Reset, SDC Clk/Cmd/Data special pins.

An handful of pins can have their IRQ generated by the PDC
module, and for this support for the new wakeup_present &
wakeup_enable_bit is required to allow the "wakeup" event
to be passed to PDC and generate an interrupt or a wakeup
system event.

As SM8550, it also supports the i2c_pull_bit bit to enable the
on-SoC load resistor for I2C busses.

Dependencies: None

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm85650/upstream/integ

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
Neil Armstrong (3):
      dt-bindings: pinctrl: document the SM8650 Top Level Mode Multiplexer
      pinctrl: qcom: handle intr_target_reg wakeup_present/enable bits
      pinctrl: qcom: Introduce the SM8650 Top Level Mode Multiplexer driver

 .../bindings/pinctrl/qcom,sm8650-tlmm.yaml         |  157 ++
 drivers/pinctrl/qcom/Kconfig.msm                   |    8 +
 drivers/pinctrl/qcom/Makefile                      |    1 +
 drivers/pinctrl/qcom/pinctrl-msm.c                 |   32 +
 drivers/pinctrl/qcom/pinctrl-msm.h                 |    5 +
 drivers/pinctrl/qcom/pinctrl-sm8650.c              | 1762 ++++++++++++++++++++
 6 files changed, 1965 insertions(+)
---
base-commit: fe1998aa935b44ef873193c0772c43bce74f17dc
change-id: 20231016-topic-sm8650-upstream-tlmm-4ece354ef319

Best regards,
-- 
Neil Armstrong <neil.armstrong@xxxxxxxxxx>