Re: [PATCH v3 15/20] watchdog: s3c2410_wdt: Add support for Google tensor SoCs

[Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>]

On 11/10/2023 20:48, Peter Griffin wrote:
> This patch adds the compatibles and drvdata for the Google
> gs101 & gs201 SoCs found in Pixel 6 and Pixel 7 phones. Similar
> to Exynos850 it has two watchdog instances, one for each cluster
> and has some control bits in PMU registers.
> 
> The watchdog IP found in gs101 SoCs also supports a few
> additional bits/features in the WTCON register which we add
> support for and an additional register detailed below.
> 
> dbgack-mask - Enables masking WDT interrupt and reset request
> according to asserted DBGACK input
> 
> windowed-mode - Enabled Windowed watchdog mode
> 
> Windowed watchdog mode also has an additional register WTMINCNT.
> If windowed watchdog is enabled and you reload WTCNT when the
> value is greater than WTMINCNT, it prompts interrupt or reset
> request as if the watchdog time has expired.
> 
> Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
> ---
>  drivers/watchdog/s3c2410_wdt.c | 127 ++++++++++++++++++++++++++++++---
>  1 file changed, 116 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
> index 0b4bd883ff28..36c170047180 100644
> --- a/drivers/watchdog/s3c2410_wdt.c
> +++ b/drivers/watchdog/s3c2410_wdt.c
> @@ -31,12 +31,14 @@
>  #define S3C2410_WTDAT		0x04
>  #define S3C2410_WTCNT		0x08
>  #define S3C2410_WTCLRINT	0x0c
> -
> +#define S3C2410_WTMINCNT	0x10
>  #define S3C2410_WTCNT_MAXCNT	0xffff
>  
> -#define S3C2410_WTCON_RSTEN	(1 << 0)
> -#define S3C2410_WTCON_INTEN	(1 << 2)
> -#define S3C2410_WTCON_ENABLE	(1 << 5)
> +#define S3C2410_WTCON_RSTEN		(1 << 0)
> +#define S3C2410_WTCON_INTEN		(1 << 2)
> +#define S3C2410_WTCON_ENABLE		(1 << 5)
> +#define S3C2410_WTCON_DBGACK_MASK	(1 << 16)
> +#define S3C2410_WTCON_WINDOWED_WD	(1 << 20)
>  
>  #define S3C2410_WTCON_DIV16	(0 << 3)
>  #define S3C2410_WTCON_DIV32	(1 << 3)
> @@ -51,6 +53,7 @@
>  
>  #define S3C2410_WATCHDOG_ATBOOT		(0)
>  #define S3C2410_WATCHDOG_DEFAULT_TIME	(15)
> +#define S3C2410_WINDOW_MULTIPLIER	2
>  
>  #define EXYNOS5_RST_STAT_REG_OFFSET		0x0404
>  #define EXYNOS5_WDT_DISABLE_REG_OFFSET		0x0408
> @@ -67,6 +70,13 @@
>  #define EXYNOSAUTOV9_CLUSTER0_WDTRESET_BIT	25
>  #define EXYNOSAUTOV9_CLUSTER1_WDTRESET_BIT	24
>  
> +#define GS_CLUSTER0_NONCPU_OUT			0x1220
> +#define GS_CLUSTER1_NONCPU_OUT			0x1420
> +#define GS_CLUSTER0_NONCPU_INT_EN		0x1244
> +#define GS_CLUSTER1_NONCPU_INT_EN		0x1444
> +#define GS_CLUSTER2_NONCPU_INT_EN		0x1644
> +#define GS_RST_STAT_REG_OFFSET			0x3B44
> +
>  /**
>   * DOC: Quirk flags for different Samsung watchdog IP-cores
>   *
> @@ -106,6 +116,8 @@
>  #define QUIRK_HAS_PMU_RST_STAT			(1 << 2)
>  #define QUIRK_HAS_PMU_AUTO_DISABLE		(1 << 3)
>  #define QUIRK_HAS_PMU_CNT_EN			(1 << 4)
> +#define QUIRK_HAS_DBGACK_BIT			(1 << 5)
> +#define QUIRK_HAS_WTMINCNT_REG			(1 << 6)
>  
>  /* These quirks require that we have a PMU register map */
>  #define QUIRKS_HAVE_PMUREG \
> @@ -263,6 +275,54 @@ static const struct s3c2410_wdt_variant drv_data_exynosautov9_cl1 = {
>  		  QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_CNT_EN,
>  };
>  
> +static const struct s3c2410_wdt_variant drv_data_gs101_cl0 = {
> +	.mask_reset_reg = GS_CLUSTER0_NONCPU_INT_EN,
> +	.mask_bit = 2,
> +	.mask_reset_inv = true,
> +	.rst_stat_reg = GS_RST_STAT_REG_OFFSET,
> +	.rst_stat_bit = 0,
> +	.cnt_en_reg = GS_CLUSTER0_NONCPU_OUT,
> +	.cnt_en_bit = 8,
> +	.quirks = QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_MASK_RESET | QUIRK_HAS_PMU_CNT_EN |
> +		  QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_DBGACK_BIT | QUIRK_HAS_WTMINCNT_REG,
> +};
> +
> +static const struct s3c2410_wdt_variant drv_data_gs101_cl1 = {
> +	.mask_reset_reg = GS_CLUSTER1_NONCPU_INT_EN,
> +	.mask_bit = 2,
> +	.mask_reset_inv = true,
> +	.rst_stat_reg = GS_RST_STAT_REG_OFFSET,
> +	.rst_stat_bit = 1,
> +	.cnt_en_reg = GS_CLUSTER1_NONCPU_OUT,
> +	.cnt_en_bit = 7,
> +	.quirks = QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_MASK_RESET | QUIRK_HAS_PMU_CNT_EN |
> +		  QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_DBGACK_BIT | QUIRK_HAS_WTMINCNT_REG,
> +};
> +
> +static const struct s3c2410_wdt_variant drv_data_gs201_cl0 = {

I do not see the difference between this and drv_data_gs101_cl0. Same
for cluster 1. Looks like these are compatible, so make them compatible.

Also same concerns as Guenter's has.

Best regards,
Krzysztof