> Subject: Re: [PATCH v5 4/7] gpio: vf610: add i.MX8ULP of_device_id entry > > On Sun, Oct 1, 2023 at 10:23 AM Peng Fan (OSS) <peng.fan@xxxxxxxxxxx> > wrote: > > > > From: Peng Fan <peng.fan@xxxxxxx> > > > > i.MX8ULP/93 GPIO supports similar feature as i.MX7ULP GPIO, but > > i.MX8ULP is actually not hardware compatible with i.MX7ULP. i.MX8ULP > > only has one register base, not two bases. i.MX8ULP and i.MX93 > > actually has two interrupts for each gpio controller, one for > > Trustzone non-secure world, one for secure world. > > > > Although the Linux Kernel driver gpio-vf610.c could work with > > fsl,imx7ulp-gpio compatible, it is based on some tricks did in device > > tree with some offset added to base address. > > > > Add a new of_device_id entry for i.MX8ULP. But to make the driver > > could also support old bindings, check the compatible string first, > > before check the device data. > > > > Signed-off-by: Peng Fan <peng.fan@xxxxxxx> > > --- > > drivers/gpio/gpio-vf610.c | 47 > > ++++++++++++++++++++++++++++++++++++++++------- > > 1 file changed, 40 insertions(+), 7 deletions(-) > > > > diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c > > index dbc7ba0ee72c..8e12706c0b22 100644 > > --- a/drivers/gpio/gpio-vf610.c > > +++ b/drivers/gpio/gpio-vf610.c > > @@ -25,6 +25,7 @@ > > struct fsl_gpio_soc_data { > > /* SoCs has a Port Data Direction Register (PDDR) */ > > bool have_paddr; > > + bool have_dual_base; > > }; > > > > struct vf610_gpio_port { > > @@ -60,13 +61,26 @@ struct vf610_gpio_port { > > #define PORT_INT_EITHER_EDGE 0xb > > #define PORT_INT_LOGIC_ONE 0xc > > > > +#define IMX8ULP_GPIO_BASE_OFF 0x40 > > +#define IMX8ULP_BASE_OFF 0x80 > > + > > +static const struct fsl_gpio_soc_data vf610_data = { > > + .have_dual_base = true, > > +}; > > + > > static const struct fsl_gpio_soc_data imx_data = { > > .have_paddr = true, > > + .have_dual_base = true, > > +}; > > + > > +static const struct fsl_gpio_soc_data imx8ulp_data = { > > + .have_paddr = true, > > }; > > > > static const struct of_device_id vf610_gpio_dt_ids[] = { > > - { .compatible = "fsl,vf610-gpio", .data = NULL, }, > > + { .compatible = "fsl,vf610-gpio", .data = &vf610_data }, > > { .compatible = "fsl,imx7ulp-gpio", .data = &imx_data, }, > > + { .compatible = "fsl,imx8ulp-gpio", .data = &imx8ulp_data, }, > > { /* sentinel */ } > > }; > > > > @@ -263,19 +277,38 @@ static int vf610_gpio_probe(struct > platform_device *pdev) > > struct gpio_irq_chip *girq; > > int i; > > int ret; > > + bool dual_base; > > > > port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL); > > if (!port) > > return -ENOMEM; > > > > port->sdata = of_device_get_match_data(dev); > > - port->base = devm_platform_ioremap_resource(pdev, 0); > > - if (IS_ERR(port->base)) > > - return PTR_ERR(port->base); > > > > - port->gpio_base = devm_platform_ioremap_resource(pdev, 1); > > - if (IS_ERR(port->gpio_base)) > > - return PTR_ERR(port->gpio_base); > > + dual_base = port->sdata->have_dual_base; > > + > > + /* support old compatible strings */ > > + if (device_is_compatible(dev, "fsl,imx7ulp-gpio") && > > + (device_is_compatible(dev, "fsl,imx93-gpio") || > > Why not just add this compatible to vf610_gpio_dt_ids? "fsl,imx93-gpio", "fsl,imx7ulp-gpio" is not a correct entry combination. This is to support legacy old compatible strings. Thanks, Peng. > > Bart > > > + (device_is_compatible(dev, "fsl,imx8ulp-gpio")))) > > + dual_base = true; > > + > > + if (dual_base) { > > + port->base = devm_platform_ioremap_resource(pdev, 0); > > + if (IS_ERR(port->base)) > > + return PTR_ERR(port->base); > > + > > + port->gpio_base = devm_platform_ioremap_resource(pdev, 1); > > + if (IS_ERR(port->gpio_base)) > > + return PTR_ERR(port->gpio_base); > > + } else { > > + port->base = devm_platform_ioremap_resource(pdev, 0); > > + if (IS_ERR(port->base)) > > + return PTR_ERR(port->base); > > + > > + port->gpio_base = port->base + IMX8ULP_GPIO_BASE_OFF; > > + port->base = port->base + IMX8ULP_BASE_OFF; > > + } > > > > port->irq = platform_get_irq(pdev, 0); > > if (port->irq < 0) > > > > -- > > 2.37.1 > >