Re: [PATCH RFC v4 4/6] ARM: pxa: Convert reset driver to GPIO descriptors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Oct 1, 2023 at 5:13 PM Duje Mihanović <duje.mihanovic@xxxxxxxx> wrote:
>
> The PXA reset driver still uses the legacy GPIO interface for
> configuring and asserting the reset pin.
>
> Convert it to use the GPIO descriptor interface.

> Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>

I dunno how.

...

> +       reset_gpio = gpiod_get(NULL, "reset generator", GPIOD_ASIS);
> +       if (IS_ERR(reset_gpio)) {
> +               pr_err("Can't request reset_gpio: %pe\n", reset_gpio);
> +               return PTR_ERR(reset_gpio);
>         }

Here you asked for the GPIO named as "reset generator-gpio(s)" (The
"(s)" part is for new bindings), but you must not use spaces in the
GPIO names. Moreover the string literal there is for labeling, and not
for matching.

...

> +GPIO_LOOKUP_SINGLE(spitz_reset_gpio_table, NULL, "pxa-gpio",

And here should be gpios. That's what you have to request, but because
of the global (device-less) nature of this, you have to be very
careful to avoid any clashes.

> +               SPITZ_GPIO_ON_RESET, "reset generator", GPIO_ACTIVE_HIGH);

...

TBH, I don't know how it is supposed to work with your current code
and if Linus really was okay with this.

-- 
With Best Regards,
Andy Shevchenko




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux