Re: [PATCH RFC v2 3/6] ARM: pxa: Convert Spitz CF power control to GPIO descriptors

[Andy Shevchenko <andy@xxxxxxxxxx>]

On Tue, Sep 26, 2023 at 05:46:24PM +0200, Duje Mihanović wrote:
> Sharp's Spitz board still uses the legacy GPIO interface for controlling
> the power supply to its CF and SD card slots.
> 
> Convert it to use the GPIO descriptor interface.

...

> +	cf_power = gpiod_get(&pxa_device_mci.dev, "cf_power", GPIOD_ASIS);
> +	if (IS_ERR(cf_power)) {
> +		dev_err(&pxa_device_mci.dev,
> +				"failed to get power control GPIO with %ld\n",
> +				PTR_ERR(cf_power));
> +		return;
> +	}

> +	gpiod_put(cf_power);

Don't you want to use guarded gpiod_get()?
Okay, it seems not yet in the pending list, but we can survive without that.

-- 
With Best Regards,
Andy Shevchenko