RE: [PATCH v17 3/4] spi: Add support for Intel LJCA USB SPI driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> From: Hans de Goede
> 
> Hi Wentong,
> 
> On 9/14/23 14:45, Wentong Wu wrote:
> > Implements the SPI function of Intel USB-I2C/GPIO/SPI adapter device
> > named "La Jolla Cove Adapter" (LJCA). It communicate with LJCA SPI
> > module with specific protocol through interfaces exported by LJCA USB
> > driver.
> >
> > Signed-off-by: Wentong Wu <wentong.wu@xxxxxxxxx>
> > Reviewed-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
> > Reviewed-by: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
> > Tested-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> > ---
> >  drivers/spi/Kconfig    |  11 ++
> >  drivers/spi/Makefile   |   1 +
> >  drivers/spi/spi-ljca.c | 297
> > +++++++++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 309 insertions(+)
> >  create mode 100644 drivers/spi/spi-ljca.c
> >
> > diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index
> > 8962b25..ad18864 100644
> > --- a/drivers/spi/Kconfig
> > +++ b/drivers/spi/Kconfig
> > @@ -583,6 +583,17 @@ config SPI_FSL_ESPI
> >  	  From MPC8536, 85xx platform uses the controller, and all P10xx,
> >  	  P20xx, P30xx,P40xx, P50xx uses this controller.
> >
> > +config SPI_LJCA
> > +	tristate "Intel La Jolla Cove Adapter SPI support"
> > +	depends on USB_LJCA
> > +	default USB_LJCA
> > +	help
> > +	  Select this option to enable SPI driver for the Intel
> > +	  La Jolla Cove Adapter (LJCA) board.
> > +
> > +	  This driver can also be built as a module. If so, the module
> > +	  will be called spi-ljca.
> > +
> >  config SPI_MESON_SPICC
> >  	tristate "Amlogic Meson SPICC controller"
> >  	depends on COMMON_CLK
> > diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index
> > 080c2c1..0847962 100644
> > --- a/drivers/spi/Makefile
> > +++ b/drivers/spi/Makefile
> > @@ -70,6 +70,7 @@ obj-$(CONFIG_SPI_INTEL_PCI)		+= spi-intel-
> pci.o
> >  obj-$(CONFIG_SPI_INTEL_PLATFORM)	+= spi-intel-platform.o
> >  obj-$(CONFIG_SPI_LANTIQ_SSC)		+= spi-lantiq-ssc.o
> >  obj-$(CONFIG_SPI_JCORE)			+= spi-jcore.o
> > +obj-$(CONFIG_SPI_LJCA)			+= spi-ljca.o
> >  obj-$(CONFIG_SPI_LM70_LLP)		+= spi-lm70llp.o
> >  obj-$(CONFIG_SPI_LP8841_RTC)		+= spi-lp8841-rtc.o
> >  obj-$(CONFIG_SPI_MESON_SPICC)		+= spi-meson-spicc.o
> 
> I don't know what you are using as a base commit for these patches, but this
> does not apply cleanly on top of v6.6-rc1.
> 
> For the next version of these patches please rebases this on top of v6.6-rc1; or
> on Linus' master branch.
> 

Thanks, v17 is based on 6.5-rc4, now v19 is based on Linus' master branch.

BR,
Wentong

> Regards,
> 
> Hans




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux