[PATCH v2 5/6] arm64: dts: imx8ulp: update gpio node

["Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>]

From: Peng Fan <peng.fan@xxxxxxx>

The i.MX8ULP GPIO supports two interrupts and one register base, and not
compatible with i.MX7ULP. Update the node following dt-binding doc.

Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index 8a6596d5a581..3921fdace792 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -484,11 +484,12 @@ fec: ethernet@29950000 {
 		};
 
 		gpioe: gpio@2d000080 {
-				compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
-				reg = <0x2d000080 0x1000>, <0x2d000040 0x40>;
+				compatible = "fsl,imx8ulp-gpio";
+				reg = <0x2d000000 0x1000>;
 				gpio-controller;
 				#gpio-cells = <2>;
-				interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				clocks = <&pcc4 IMX8ULP_CLK_RGPIOE>,
@@ -498,11 +499,12 @@ gpioe: gpio@2d000080 {
 		};
 
 		gpiof: gpio@2d010080 {
-				compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
-				reg = <0x2d010080 0x1000>, <0x2d010040 0x40>;
+				compatible = "fsl,imx8ulp-gpio";
+				reg = <0x2d010000 0x1000>;
 				gpio-controller;
 				#gpio-cells = <2>;
-				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				clocks = <&pcc4 IMX8ULP_CLK_RGPIOF>,
@@ -533,11 +535,12 @@ pcc5: clock-controller@2da70000 {
 		};
 
 		gpiod: gpio@2e200080 {
-			compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
-			reg = <0x2e200080 0x1000>, <0x2e200040 0x40>;
+			compatible = "fsl,imx8ulp-gpio";
+			reg = <0x2e200000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			clocks = <&pcc5 IMX8ULP_CLK_RGPIOD>,

-- 
2.37.1