Re: [PATCH RESEND v5 1/2] dt-binding: pinctrl: Add NPCM8XX pinctrl and GPIO documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

Thanks for your review

On Mon, 21 Aug 2023 at 20:09, Rob Herring <robh@xxxxxxxxxx> wrote:
>
> On Wed, Aug 09, 2023 at 09:57:21PM +0300, Tomer Maimon wrote:
> > Added device tree binding documentation for Nuvoton Arbel BMC NPCM8XX
> > pinmux and GPIO controller.
> >
> > Signed-off-by: Tomer Maimon <tmaimon77@xxxxxxxxx>
> > ---
> >  .../pinctrl/nuvoton,npcm845-pinctrl.yaml      | 215 ++++++++++++++++++
> >  1 file changed, 215 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
> > new file mode 100644
> > index 000000000000..8a12f5134450
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
> > @@ -0,0 +1,215 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pinctrl/nuvoton,npcm845-pinctrl.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Nuvoton NPCM845 Pin Controller and GPIO
> > +
> > +maintainers:
> > +  - Tomer Maimon <tmaimon77@xxxxxxxxx>
> > +
> > +description:
> > +  The Nuvoton BMC NPCM8XX Pin Controller multi-function routed through
> > +  the multiplexing block, Each pin supports GPIO functionality (GPIOx)
> > +  and multiple functions that directly connect the pin to different
> > +  hardware blocks.
> > +
> > +properties:
> > +  compatible:
> > +    const: nuvoton,npcm845-pinctrl
> > +
> > +  ranges:
> > +    maxItems: 1
> > +
> > +  '#address-cells':
> > +    const: 1
> > +
> > +  '#size-cells':
> > +    const: 1
> > +
> > +  nuvoton,sysgcr:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description: a phandle to access GCR registers.
> > +
> > +patternProperties:
> > +  '^gpio@':
> > +    type: object
> > +
> > +    description:
> > +      Eight GPIO banks that each contain 32 GPIOs.
> > +
> > +    properties:
> > +      gpio-controller: true
> > +
> > +      '#gpio-cells':
> > +        const: 2
> > +
> > +      reg:
> > +        maxItems: 1
> > +
> > +      interrupts:
> > +        maxItems: 1
> > +
> > +      gpio-ranges:
> > +        maxItems: 1
> > +
> > +    required:
> > +      - gpio-controller
> > +      - '#gpio-cells'
> > +      - reg
> > +      - interrupts
> > +      - gpio-ranges
> > +
> > +  '-mux$':
> > +    $ref: pinmux-node.yaml#
> > +
> > +    properties:
> > +      groups:
> > +        description:
> > +          One or more groups of pins to mux to a certain function
> > +        items:
> > +          enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi,
> > +                  smb5b, smb5c, lkgpo0, pspi, jm1, jm2, smb4den, smb4b,
> > +                  smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21,
> > +                  smb22, smb23, smb23b, smb4d, smb14, smb5, smb4, smb3,
> > +                  spi0cs1, spi0cs2, spi0cs3, spi1cs0, spi1cs1, spi1cs2,
> > +                  spi1cs3, spi1cs23, smb3c, smb3b, bmcuart0a, uart1, jtag2,
> > +                  bmcuart1, uart2, sg1mdio, bmcuart0b, r1err, r1md, r1oen,
> > +                  r2oen, rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3,
> > +                  fanin4, fanin5, fanin6, fanin7, fanin8, fanin9, fanin10,
> > +                  fanin11, fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2,
> > +                  pwm3, r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg2,
> > +                  ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5, smb0, smb1, smb2,
> > +                  smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1,
> > +                  sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11,
> > +                  mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk,
> > +                  scipme, smi, smb6, smb7, spi1, faninx, r1, spi3, spi3cs1,
> > +                  spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, smb0c, smb0den,
> > +                  smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, smb13, spix,
> > +                  spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, hgpio4,
> > +                  hgpio5, hgpio6, hgpio7 ]
> > +
> > +      function:
> > +        description:
> > +          The function that a group of pins is muxed to
> > +        enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi,
> > +                smb5b, smb5c, lkgpo0, pspi, jm1, jm2, smb4den, smb4b,
> > +                smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21,
> > +                smb22, smb23, smb23b, smb4d, smb14, smb5, smb4, smb3,
> > +                spi0cs1, spi0cs2, spi0cs3, spi1cs0, spi1cs1, spi1cs2,
> > +                spi1cs3, spi1cs23, smb3c, smb3b, bmcuart0a, uart1, jtag2,
> > +                bmcuart1, uart2, sg1mdio, bmcuart0b, r1err, r1md, r1oen,
> > +                r2oen, rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3,
> > +                fanin4, fanin5, fanin6, fanin7, fanin8, fanin9, fanin10,
> > +                fanin11, fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2,
> > +                pwm3, r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg2,
> > +                ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5, smb0, smb1, smb2,
> > +                smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1,
> > +                sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11,
> > +                mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk,
> > +                scipme, smi, smb6, smb7, spi1, faninx, r1, spi3, spi3cs1,
> > +                spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, smb0c, smb0den,
> > +                smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, smb13, spix,
> > +                spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, hgpio4,
> > +                hgpio5, hgpio6, hgpio7 ]
> > +
> > +    dependencies:
> > +      groups: [ function ]
> > +      function: [ groups ]
> > +
> > +    additionalProperties: false
> > +
> > +  '^pin':
> > +    $ref: pincfg-node.yaml#
> > +
> > +    properties:
> > +      pins:
> > +        description:
> > +          A list of pins to configure in certain ways, such as enabling
> > +          debouncing
> > +
> > +      bias-disable: true
> > +
> > +      bias-pull-up: true
> > +
> > +      bias-pull-down: true
> > +
> > +      input-enable: true
> > +
> > +      output-low: true
> > +
> > +      output-high: true
> > +
> > +      drive-push-pull: true
> > +
> > +      drive-open-drain: true
> > +
> > +      input-debounce:
> > +        description:
> > +          Debouncing periods in microseconds, one period per interrupt
> > +          bank found in the controller
> > +        $ref: /schemas/types.yaml#/definitions/uint32-array
> > +        minItems: 1
> > +        maxItems: 4
> > +
> > +      slew-rate:
> > +        description: |
> > +          0: Low rate
> > +          1: High rate
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +        enum: [0, 1]
> > +
> > +      drive-strength:
> > +        enum: [ 0, 1, 2, 4, 8, 12 ]
> > +
> > +    additionalProperties: false
> > +
> > +allOf:
> > +  - $ref: pinctrl.yaml#
> > +
> > +required:
> > +  - compatible
> > +  - ranges
> > +  - '#address-cells'
> > +  - '#size-cells'
> > +  - nuvoton,sysgcr
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/gpio/gpio.h>
> > +
> > +    soc {
> > +      #address-cells = <2>;
> > +      #size-cells = <2>;
> > +
> > +      pinctrl: pinctrl@f0800260 {
> > +        compatible = "nuvoton,npcm845-pinctrl";
> > +        ranges = <0x0 0x0 0xf0010000 0x8000>;
> > +        #address-cells = <1>;
> > +        #size-cells = <1>;
> > +        nuvoton,sysgcr = <&gcr>;
> > +
> > +        gpio0: gpio@f0010000 {
>
> unit-address should be 0.
>
> Otherwise,
The unit-address is correct f0010000
>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
>
> > +          gpio-controller;
> > +          #gpio-cells = <2>;
> > +          reg = <0x0 0xB0>;

Thanks,

Tomer



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux