On Mon, Aug 21, 2023 at 11:14:43AM +0800, haibo.chen@xxxxxxx wrote: > From: Haibo Chen <haibo.chen@xxxxxxx> > > MX2 has one interrupt for all gpio ports, so do not need the value > port->irq_high, need to set to 0. Current setting is -1, which will > meet issue in gpio_set_wake_irq(). Can you describe a bit more the nature of the issue? -- With Best Regards, Andy Shevchenko
Re: [PATCH] gpio: mxc: set the port->irq high to 0 for imx2
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH] gpio: mxc: set the port->irq high to 0 for imx2
- From: Andy Shevchenko <andy@xxxxxxxxxx>
- Date: Mon, 21 Aug 2023 14:00:52 +0300
- In-reply-to: <20230821031443.1443530-1-haibo.chen@nxp.com>
- Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
- References: <20230821031443.1443530-1-haibo.chen@nxp.com>
- References:
- [PATCH] gpio: mxc: set the port->irq high to 0 for imx2
- From: haibo . chen
- [PATCH] gpio: mxc: set the port->irq high to 0 for imx2
- Prev by Date: Re: [PATCH] gpiolib: notify user-space about line state changes triggered by kernel
- Next by Date: Re: [PATCH] dt-bindings: pinctrl: Drop 'phandle' properties
- Previous by thread: [PATCH] gpio: mxc: set the port->irq high to 0 for imx2
- Next by thread: [PATCH v1] pinctrl: cherryview: use ACPI_HANDLE() to pass handle
- Index(es):
 |