Re: [PATCH v9 2/4] i2c: Add support for Intel LJCA USB I2C driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Weontong,

patch looks good, just few minor comments.

[...]

> +static u8 ljca_i2c_format_slave_addr(u8 slave_addr, u8 type)
> +{
> +	return (slave_addr << 1) | type;
> +}

this is used only once, you could eventually ger rid of it and
use explicitely in the start function.

[...]

> +static int ljca_i2c_start(struct ljca_i2c_dev *ljca_i2c, u8 slave_addr,
> +			  enum ljca_xfer_type type)
> +{
> +	struct ljca_i2c_rw_packet *w_packet =
> +			(struct ljca_i2c_rw_packet *)ljca_i2c->obuf;
> +	struct ljca_i2c_rw_packet *r_packet =
> +			(struct ljca_i2c_rw_packet *)ljca_i2c->ibuf;
> +	s16 rp_len;
> +	int ret;
> +
> +	memset(w_packet, 0, sizeof(*w_packet));

do you really need to set this to '0' as you are initializing the
header

> +	w_packet->id = ljca_i2c->i2c_info->id;
> +	w_packet->len = cpu_to_le16(sizeof(*w_packet->data));
> +	w_packet->data[0] = ljca_i2c_format_slave_addr(slave_addr, type);
> +
> +	ret = ljca_transfer(ljca_i2c->ljca, LJCA_I2C_START, w_packet,
> +			    struct_size(w_packet, data, 1), r_packet,
> +			    LJCA_I2C_BUF_SIZE);
> +	if (ret < 0)
> +		return ret;
> +	else if (ret < sizeof(*r_packet))
> +		return -EIO;
> +
> +	rp_len = le16_to_cpu(r_packet->len);
> +	if (rp_len < 0 || r_packet->id != w_packet->id) {
> +		dev_err(&ljca_i2c->adap.dev,
> +			"i2c start failed len: %d id: %d %d\n",
> +			rp_len, r_packet->id, w_packet->id);
> +		return -EIO;
> +	}
> +
> +	return 0;
> +}
> +
> +static int ljca_i2c_stop(struct ljca_i2c_dev *ljca_i2c, u8 slave_addr)

the return value here is not used anywhere, what about making
this function void and printing a warning in case of failure?

[...]

> +static int ljca_i2c_probe(struct auxiliary_device *auxdev,
> +			  const struct auxiliary_device_id *aux_dev_id)
> +{

[...]

> +	ret = ljca_i2c_init(ljca_i2c, ljca_i2c->i2c_info->id);
> +	if (ret) {
> +		dev_err(&auxdev->dev, "i2c init failed id: %d\n",
> +			ljca_i2c->i2c_info->id);
> +		return -EIO;

please use dev_err_probe();

Andi



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux