Re: [PATCH v2 27/28] dt-bindings: net: fsl,qmc-hdlc: Add framer support

[Herve Codina <herve.codina@xxxxxxxxxxx>]

Hi Rob,

On Wed, 2 Aug 2023 18:42:59 -0600
Rob Herring <robh@xxxxxxxxxx> wrote:

> On Wed, Jul 26, 2023 at 05:02:23PM +0200, Herve Codina wrote:
> > A framer can be connected to the QMC HDLC.
> > If present, this framer is the interface between the TDM used by the QMC
> > HDLC and the E1/T1 line.
> > The QMC HDLC can use this framer to get information about the line and
> > configure the line.
> > 
> > Add an optional framer property to reference the framer itself.
> > 
> > Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx>
> > ---
> >  Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml | 5 +++++
> >  1 file changed, 5 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml b/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml
> > index 8bb6f34602d9..bf29863ab419 100644
> > --- a/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml
> > +++ b/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml
> > @@ -27,6 +27,11 @@ properties:
> >        Should be a phandle/number pair. The phandle to QMC node and the QMC
> >        channel to use.
> >  
> > +  framer:
> > +    $ref: /schemas/types.yaml#/definitions/phandle  
> 
> Now you've defined this property twice. Please avoid doing that.

I don't see what you mean.

I previously defined the framer property at the framer-codec node as it is
a framer consumer (it was a mistake because this framer-codec node is a child of
the framer node but that's an other story).

Here, at the qmc-hdlc node, I define this property in order to use the framer as a
consumer too.

What is wrong ?

Best regards,
Hervé

> 
> > +    description:
> > +      phandle to the framer node
> > +
> >  required:
> >    - compatible
> >    - fsl,qmc-chan
> > -- 
> > 2.41.0
> >