On 7/25/2023 12:35 AM, Elliot Berman wrote:
On 7/20/2023 12:04 AM, Kathiravan T wrote:
From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
CrashDump collection is based on the DLOAD bit of TCSR register. To
retain
other bits, we read the register and modify only the DLOAD bit as the
other bits have their own significance.
Co-developed-by: Poovendhan Selvaraj <quic_poovendh@xxxxxxxxxxx>
Signed-off-by: Poovendhan Selvaraj <quic_poovendh@xxxxxxxxxxx>
Signed-off-by: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
Signed-off-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
---
Changes in V5:
- Added the Signed-off-by tag for user Poovendhan
- Dropped the macro QCOM_DOWNLOAD_MODE_SHIFT in the favor of
PREP_FIELD
drivers/firmware/qcom_scm.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 104d86e49b97..3830dcf14326 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -30,6 +30,10 @@ module_param(download_mode, bool, 0);
#define SCM_HAS_IFACE_CLK BIT(1)
#define SCM_HAS_BUS_CLK BIT(2)
+#define QCOM_DOWNLOAD_FULLDUMP 0x1
+#define QCOM_DOWNLOAD_NODUMP 0x0
+#define QCOM_DOWNLOAD_MODE_MASK BIT(4)
+
Can you update __qcom_scm_set_dload_mode to use the FIELD_PREP bits as
well? Ideally, you should be able to have no duplicate logic in
__qcom_scm_set_dload_mode and in qcom_scm_set_download_mode. Before
your patch, it was duplicated and we probably should've had it
de-duplicated. With this patch, the logic and constants used have
diverged when they don't need to.
Sure, will check this.
struct qcom_scm {
struct device *dev;
struct clk *core_clk;
@@ -440,6 +444,7 @@ static int __qcom_scm_set_dload_mode(struct
device *dev, bool enable)
static void qcom_scm_set_download_mode(bool enable)
{
bool avail;
+ int val;
int ret = 0;
avail = __qcom_scm_is_call_available(__scm->dev,
@@ -448,8 +453,10 @@ static void qcom_scm_set_download_mode(bool enable)
if (avail) {
ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
} else if (__scm->dload_mode_addr) {
- ret = qcom_scm_io_writel(__scm->dload_mode_addr,
- enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0);
+ val = enable ? QCOM_DOWNLOAD_FULLDUMP : QCOM_DOWNLOAD_NODUMP;
+ ret = qcom_scm_io_update_field(__scm->dload_mode_addr,
+ QCOM_DOWNLOAD_MODE_MASK,
+ FIELD_PREP(QCOM_DOWNLOAD_MODE_MASK, val));
} else {
dev_err(__scm->dev,
"No available mechanism for setting download mode\n");
