An interrupt storm is reported for the GPIO controller on ASUS TUF A16 but only on Linux. In comparing the GPIO registers from Windows and Linux the configuration for several bits specified in _AEI() was never actually loaded into the hardware on Linux. This meant that many values were taking the default hardware strapping for pull up/pull down. This series reworks the programming of various bits to unify the expectations for the hardware. It's confirmed to fix the interrupt storm on this system. This series is based off of the tag pinctrl-v6.5-1. Mario Limonciello (4): pinctrl: amd: Only use special debounce behavior for GPIO 0 pinctrl: amd: Drop pull up select configuration pinctrl: amd: Unify debounce handling into amd_pinconf_set() pinctrl: amd: Use amd_pinconf_set() for all config options drivers/pinctrl/pinctrl-amd.c | 59 +++++++++++++---------------------- drivers/pinctrl/pinctrl-amd.h | 1 - 2 files changed, 22 insertions(+), 38 deletions(-) base-commit: 9f0648f13e34a01f2e1a7a0d5801988a7bca6988 -- 2.34.1