[PATCH v2 19/45] dt-bindings: mfd: at91: Add SAM9X7 compatible string

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Document sam9x7 DT for flexcom.

Signed-off-by: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
index 9d837535637b..449e0af93a13 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
@@ -5,7 +5,7 @@ controller and an USART. Only one function can be used at a time and is chosen
 at boot time according to the device tree.
 
 Required properties:
-- compatible:		Should be "atmel,sama5d2-flexcom"
+- compatible:		Should be "atmel,sama5d2-flexcom" or "microchip,sam9x7-flexcom"
 - reg:			Should be the offset/length value for Flexcom dedicated
 			I/O registers (without USART, TWI or SPI registers).
 - clocks:		Should be the Flexcom peripheral clock from PMC.
-- 
2.25.1




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux