Re: [PATCH v8 00/10] serial: sc16is7xx: fix GPIO regression and rs485 improvements

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



W dniu 7.06.2023 o 16:05, Hugo Villeneuve pisze:
> From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
>
> Hello,
> this patch series mainly fixes a GPIO regression and improve RS485 flags and
> properties detection from DT.
>
> It now also includes various small fixes and improvements that were previously
> sent as separate patches, but that made testing everything difficult.
>
> Patch 1 fixes an issue with init of first port during probing.
>
> Patch 2 fixes an issue when debugging IOcontrol register, but it is also
> necessary for patch "fix regression with GPIO configuration" to work.
>
> Patch 3 fixes an incorrect label in sc16is7xx_probe() cleanup code.
>
> Patch 4 is a refactor of GPIO registration code in preparation for patch 5.
>
> Patches 5 and 6 fix a GPIO regression by (re)allowing to choose GPIO function
> for GPIO pins shared with modem status lines.
>
> Patch 7 fixes a bug with the output value when first setting the GPIO direction.
>
> Patch 8 allows to read common rs485 device-tree flags and properties.
>
> Patch 9 introduces a delay after a reset operation to respect datasheet
> timing recommandations.
>
> Patch 10 improves comments about chip variants.
>
> I have tested the changes on a custom board with two SC16IS752 DUART using a
> Variscite IMX8MN NANO SOM.
>
> Thank you.
>
> Link: [v1] https://lkml.org/lkml/2023/5/17/967 <https://lkml.org/lkml/2023/5/17/967>
> [v1] https://lkml.org/lkml/2023/5/17/777 <https://lkml.org/lkml/2023/5/17/777>
> [v1] https://lkml.org/lkml/2023/5/17/780 <https://lkml.org/lkml/2023/5/17/780>
> [v1] https://lkml.org/lkml/2023/5/17/785 <https://lkml.org/lkml/2023/5/17/785>
> [v1] https://lkml.org/lkml/2023/5/17/1311 <https://lkml.org/lkml/2023/5/17/1311>
> [v2] https://lkml.org/lkml/2023/5/18/516 <https://lkml.org/lkml/2023/5/18/516>
> [v3] https://lkml.org/lkml/2023/5/25/7 <https://lkml.org/lkml/2023/5/25/7>
> [v4] https://lkml.org/lkml/2023/5/29/656 <https://lkml.org/lkml/2023/5/29/656>
> [v5] https://lkml.org/lkml/2023/6/1/1046 <https://lkml.org/lkml/2023/6/1/1046>
> [v6] https://lkml.org/lkml/2023/6/1/1328 <https://lkml.org/lkml/2023/6/1/1328>
> [v7] https://lkml.org/lkml/2023/6/2/861 <https://lkml.org/lkml/2023/6/2/861>
>
> Changes for V3:
> - Integrated all patches into single serie to facilitate debugging and tests.
> - Reduce number of exported GPIOs depending on new property
> nxp,modem-control-line-ports
> - Added additional example in DT bindings
>
> Changes for V4:
> - Increase reset post delay to relax scheduler.
> - Put comments patches at the end.
> - Remove Fixes tag for patch "mark IOCONTROL register as volatile".
> - Improve commit messages after reviews.
> - Fix coding style issues after reviews.
> - Change GPIO registration to always register the maximum number of GPIOs
> supported by the chip, but maks-out GPIOs declared as modem control lines.
> - Add patch to refactor GPIO registration.
> - Remove patch "serial: sc16is7xx: fix syntax error in comments".
> - Remove patch "add dump registers function"
>
> Changes for V5:
> - Change patch order to facilitate stable backport(s).
> - Change duplicate device addresses in DT binding examples.
> - Use GENMASK for bit masks.
> - Replace of_property_for_each_u32() with device_property_read_u32_array
> - Add "Cc: stable..." tags
>
> Changes for V6:
> - Fix compilation bug introduced by patch 3
>
> Changes for V7:
> - Minor changes and coding style fixes after review for
> patch 5 "fix regression with GPIO configuration".
>
> Changes for V8:
> - Move mctrl_mask to "struct sc16is7xx_port" to avoid compiler warning when
> CONFIG_GPIOLIB is undefined.
> - Add "struct device" member to "struct sc16is7xx_port", in order to avoid
> passing a raw "struct device" to called functions from sc16is7xx_probe().
> - Add new patch "serial: sc16is7xx: remove obsolete out_thread label"
>
> Hugo Villeneuve (10):
> serial: sc16is7xx: fix broken port 0 uart init
> serial: sc16is7xx: mark IOCONTROL register as volatile
> serial: sc16is7xx: remove obsolete out_thread label
> serial: sc16is7xx: refactor GPIO controller registration
> dt-bindings: sc16is7xx: Add property to change GPIO function
> serial: sc16is7xx: fix regression with GPIO configuration
> serial: sc16is7xx: fix bug when first setting GPIO direction
> serial: sc16is7xx: add call to get rs485 DT flags and properties
> serial: sc16is7xx: add post reset delay
> serial: sc16is7xx: improve comments about variants
>
> .../bindings/serial/nxp,sc16is7xx.txt | 46 +++++
> drivers/tty/serial/sc16is7xx.c | 177 +++++++++++++-----
> 2 files changed, 181 insertions(+), 42 deletions(-)
>
>
> base-commit: a4d7d701121981e3c3fe69ade376fe9f26324161
> -- 
> 2.30.2
>
Hello Hugo,

I had a chance to retest and re-review everything, including setting state at direction change.
So if the pending changes to v9 are only the conversion of dt-bindings to YAML and fixups to them, then:
Reviewed-by: Lech Perczak <lech.perczak@xxxxxxxxxxxxxxx>
Tested-by: Lech Perczak <lech.perczak@xxxxxxxxxxxxxxx>

-- 
Pozdrawiam/With kind regards,
Lech Perczak

Sr. Software Engineer
Camlin Technologies Poland Limited Sp. z o.o.
Strzegomska 54,
53-611 Wroclaw
Tel:     (+48) 71 75 000 16
Email:   lech.perczak@xxxxxxxxxxxxxxx
Website: http://www.camlingroup.com





[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux