Re: [PATCH v2 00/10] Add STM32MP25 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi

On 6/2/23 15:28, Alexandre Torgue wrote:
I'm pleased to announce extension of the STM32 MPU family with the addition of
the STM32MP25 Armv8 based SoCs.

STM32MP25 family is composed of 4 SoCs defined as following:

   -STM32MP251: common part composed of 1*Cortex-A35, common peripherals like
    SDMMC, UART, SPI, I2C, PCIe, USB3, parallel and DSI display, 1*ETH ...

   -STM32MP253: STM32MP251 + 1*Cortex-A35 (dual CPU), a second ETH, CAN-FD and
    LVDS display.

   -STM32MP255: STM32MP253 + GPU/AI and video encode/decode.
   -STM32MP257: STM32MP255 + ETH TSN switch (2+1 ports).

   A second diversity layer exists for security features/ A35 frequency:
   -STM32MP25xY, "Y" gives information:
     -Y = A means A35@1.2GHz + no cryp IP and no secure boot.
     -Y = C means A35@1.2GHz + cryp IP and secure boot.
     -Y = D means A35@1.5GHz + no cryp IP and no secure boot.
     -Y = F means A35@1.5GHz + cryp IP and secure boot.

This series adds the STM32MP257F EV1 board support. This board embeds a
STM32MP257FAI SoC, with 4GB of DDR4, TSN switch (2+1 ports), 2*USB typeA,
1*USB2 typeC, SNOR OctoSPI, mini PCIe, STPMIC2 for power distribution ...

Changes since v1:

-Add Conor "reviewed-by".
-Drop patch[4] of initial series to not define SoC without board in stm32,yaml.
-Add Krzysztof "Acked-by" after reordering enum in st,stm32-syscon.yaml

Thanks
Alex

Alexandre Torgue (9):
   dt-bindings: pinctrl: stm32: support for stm32mp257 and additional
     packages
   pinctrl: stm32: add stm32mp257 pinctrl support
   arm64: introduce STM32 family on Armv8 architecture
   arm64: dts: st: introduce stm32mp25 SoCs family
   arm64: dts: st: introduce stm32mp25 pinctrl files
   dt-bindings: stm32: document stm32mp257f-ev1 board
   arm64: dts: st: add stm32mp257f-ev1 board support
   arm64: defconfig: enable ARCH_STM32 and STM32 serial driver
   MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE

Patrick Delaunay (1):
   dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon


Series applied on stm32-next.

Regards
Alex




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux