Re: [PATCH v4 0/9] serial: sc16is7xx: fix GPIO regression and rs485 improvements

[andy.shevchenko@xxxxxxxxx]

Mon, May 29, 2023 at 10:07:02AM -0400, Hugo Villeneuve kirjoitti:
> From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
> 
> Hello,
> this patch series mainly fixes a GPIO regression and improve RS485 flags and
> properties detection from DT.
> 
> It now also includes various small fixes and improvements that were previously
> sent as separate patches, but that made testing everything difficult.
> 
> Patch 1 fixes an issue when debugging IOcontrol register. After testing the GPIO
> regression patches (patches 6 and 7, tests done by Lech Perczak), it appers that
> this patch is also necessary for having the correct IOcontrol register values.
> 
> Patch 2 introduces a delay after a reset operation to respect datasheet
> timing recommandations.

These two patches are w/o Fixes tag, they should be moved in the series further
as I explained before.

> Patch 3 fixes an issue with init of first port during probing.
> 
> Patch 4 fixes a bug with the output value when first setting the GPIO direction.
> 
> Patch 5 is a refactor of GPIO registration code.
> 
> Patches 6 and 7 fix a GPIO regression by (re)allowing to choose GPIO function
> for GPIO pins shared with modem status lines.
> 
> Patch 8 allows to read common rs485 device-tree flags and properties.
> 
> Patch 9 improves comments about chip variants.
> 
> I have tested the changes on a custom board with two SC16IS752 DUART using a
> Variscite IMX8MN NANO SOM.

-- 
With Best Regards,
Andy Shevchenko