Re: [PATCH 2/3] dt-bindings: pinctrl: at91-pio4: Add push-pull support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 17/05/2023 at 13:54, Ryan.Wanner@xxxxxxxxxxxxx wrote:
From: Ryan Wanner <Ryan.Wanner@xxxxxxxxxxxxx>

Add generic push-pull support for pio4 driver.

Signed-off-by: Ryan Wanner <Ryan.Wanner@xxxxxxxxxxxxx>

Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>

---
  .../devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt    | 3 ++-
  1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
index e2b861ce16d8..774c3c269c40 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
@@ -37,7 +37,8 @@ right representation of the pin.
  Optional properties:
  - GENERIC_PINCONFIG: generic pinconfig options to use:
  	- bias-disable, bias-pull-down, bias-pull-up, drive-open-drain,
-	  input-schmitt-enable, input-debounce, output-low, output-high.
+	 drive-push-pull input-schmitt-enable, input-debounce, output-low,
+	 output-high.
  	- for microchip,sama7g5-pinctrl only:
  		- slew-rate: 0 - disabled, 1 - enabled (default)
  - atmel,drive-strength: 0 or 1 for low drive, 2 for medium drive and 3 for

--
Nicolas Ferre




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux