Re: [PATCH 3/3] arm64: dts: qcom: pm8953: add GPIOs

[Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>]

On 21.04.2023 23:56, Luca Weiss wrote:
> Add a node for the GPIOs found on the pm8953.
> 
> Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  arch/arm64/boot/dts/qcom/pm8953.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8953.dtsi b/arch/arm64/boot/dts/qcom/pm8953.dtsi
> index a1d36f9ebbd2..2268daf27fa7 100644
> --- a/arch/arm64/boot/dts/qcom/pm8953.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8953.dtsi
> @@ -79,6 +79,16 @@ rtc@6000 {
>  			reg-names = "rtc", "alarm";
>  			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
>  		};
> +
> +		pm8953_gpios: gpio@c000 {
> +			compatible = "qcom,pm8953-gpio", "qcom,spmi-gpio";
> +			reg = <0xc000>;
> +			gpio-controller;
> +			gpio-ranges = <&pm8953_gpios 0 0 8>;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
>  	};
>  
>  	pmic@1 {
>