From: Nick Hawkins <nick.hawkins@xxxxxxx>
Add support for the GXP I2C, PSU, and GPIO
drivers. As well as adjust register ranges to be
correct.
Signed-off-by: Nick Hawkins <nick.hawkins@xxxxxxx>
---
arch/arm/boot/dts/hpe-bmc-dl360gen10.dts | 161 ++++++++++++++++++
arch/arm/boot/dts/hpe-gxp.dtsi | 197 ++++++++++++++++++++---
2 files changed, 338 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
index 3a7382ce40ef..487b6485a832 100644
--- a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
+++ b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
@@ -23,4 +23,165 @@
device_type = "memory";
reg = <0x40000000 0x20000000>;
};
+
+ i2cmux@4 {
+ compatible = "i2c-mux-reg";
+ i2c-parent = <&i2c4>;
+ reg = <0xd1000374 0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ i2cmux@6 {
+ compatible = "i2c-mux-reg";
+ i2c-parent = <&i2c6>;
+ reg = <0xd1000376 0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ pagesize = <8>;
+ reg = <0x50>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+ psu@58 {
+ compatible = "hpe,gxp-psu";
+ reg = <0x58>;
+ hpe,sysreg = <&sysreg_system_controller2>;
+ };
+
+ psu@59 {
+ compatible = "hpe,gxp-psu";
+ reg = <0x59>;
+ hpe,sysreg = <&sysreg_system_controller2>;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&gpio {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "", "", "", /*0 - 9*/
+ "", "", "", "", "", "", "", "", "", "", /*10 - 19*/
+ "", "", "", "", "", "", "", "", "", "", /*20 - 29*/
+ "", "", "", "", "", "", "", "", "", "", /*30 - 39*/
+ "", "", "", "", "", "", "", "", "", "", /*40 - 49*/
+ "", "", "", "", "", "", "", "", "", "", /*50 - 59*/
+ "", "", "", "", "", "", "", "", "", "", /*60 - 69*/
+ "", "", "", "", "", "", "", "", "", "", /*70 - 79*/
+ "", "", "", "", "", "", "", "", "", "", /*80 - 89*/
+ "", "", "", "", "", "", "", "", "", "", /*90 - 99*/
+ "", "", "", "", "", "", "", "", "", "", /*100 - 109*/
+ "", "", "", "", "", "", "", "", "", "", /*110 - 119*/
+ "", "", "", "", "", "", "", "", "", "", /*120 - 129*/
+ "", "", "", "", "", "", "", "", "", "", /*130 - 139*/
+ "", "", "", "", "", "", "", "", "", "", /*140 - 149*/
+ "", "", "", "", "", "", "", "", "", "", /*150 - 159*/
+ "", "", "", "", "", "", "", "", "", "", /*160 - 169*/
+ "", "", "", "", "", "", "", "", "", "", /*170 - 179*/
+ "", "", "", "", "", "", "", "", "", "", /*180 - 189*/
+ "", "", "RESET_OUT", "NMI_OUT", "", "", "", "", "", "", /*190 - 199*//*GPIO*/
+ "", "", "", "", "", "", "", "", "", "", /*Vuhc 200-209*/
+ "POWER_OUT", "PS_PWROK", "PCIERST", "POST_COMPLETE", "", "", "", "", "", ""; /*210 - 219*/
+};
+
+&gpio1 {
+ gpio-line-names =
+ "IOP_LED1", "IOP_LED2", "IOP_LED3", "IOP_LED4", "IOP_LED5", "IOP_LED6", "IOP_LED7",
+ "IOP_LED8", "FAN1_INST", "FAN2_INST", "FAN3_INST", "FAN4_INST", "FAN5_INST", "FAN6_INST",
+ "FAN7_INST", "FAN8_INST", "FAN1_FAIL", "FAN2_FAIL", "FAN3_FAIL", "FAN4_FAIL", "FAN5_FAIL",
+ "FAN6_FAIL", "FAN7_FAIL", "FAN8_FAIL", "FAN1_ID", "FAN2_ID", "FAN3_ID", "FAN4_ID",
+ "FAN5_ID", "FAN6_ID", "FAN7_ID", "FAN8_ID", "IDENTIFY", "HEALTH_RED", "HEALTH_AMBER",
+ "POWER_BUTTON", "UID_PRESS", "SLP", "NMI_BUTTON", "RESET_BUTTON", "SIO_S5",
+ "SO_ON_CONTROL", "PSU1_INST", "PSU2_INST", "PSU3_INST", "PSU4_INST", "PSU5_INST",
+ "PSU6_INST", "PSU7_INST", "PSU8_INST", "PSU1_AC", "PSU2_AC", "PSU3_AC", "PSU4_AC",
+ "PSU5_AC", "PSU6_AC", "PSU7_AC", "PSU8_AC", "PSU1_DC", "PSU2_DC", "PSU3_DC", "PSU4_DC",
+ "PSU5_DC", "PSU6_DC", "PSU7_DC", "PSU8_DC", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "";
};
diff --git a/arch/arm/boot/dts/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe-gxp.dtsi
index cf735b3c4f35..8a8faf7fbd60 100644
--- a/arch/arm/boot/dts/hpe-gxp.dtsi
+++ b/arch/arm/boot/dts/hpe-gxp.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree file for HPE GXP
+ * Device Tree for HPE GXP
*/
/dts-v1/;
@@ -52,76 +52,233 @@
cache-level = <2>;
};
- ahb@c0000000 {
+ ahb@80000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0xc0000000 0x30000000>;
- dma-ranges;
+ ranges = <0x0 0x80000000 0x20000000>,
+ <0x40000000 0xc0000000 0x3fff0000>;
- vic0: interrupt-controller@eff0000 {
+ vic0: interrupt-controller@4eff0000 {
compatible = "arm,pl192-vic";
- reg = <0xeff0000 0x1000>;
+ reg = <0x4eff0000 0x1000>;
interrupt-controller;
#interrupt-cells = <1>;
};
- vic1: interrupt-controller@80f00000 {
+ vic1: interrupt-controller@f00000 {
compatible = "arm,pl192-vic";
- reg = <0x80f00000 0x1000>;
+ reg = <0xf00000 0x1000>;
interrupt-controller;
#interrupt-cells = <1>;
};
- uarta: serial@e0 {
+ uarta: serial@400000e0 {
compatible = "ns16550a";
- reg = <0xe0 0x8>;
+ reg = <0x400000e0 0x8>;
interrupts = <17>;
interrupt-parent = <&vic0>;
clock-frequency = <1846153>;
reg-shift = <0>;
};
- uartb: serial@e8 {
+ uartb: serial@400000e8 {
compatible = "ns16550a";
- reg = <0xe8 0x8>;
+ reg = <0x400000e8 0x8>;
interrupts = <18>;
interrupt-parent = <&vic0>;
clock-frequency = <1846153>;
reg-shift = <0>;
};
- uartc: serial@f0 {
+ uartc: serial@400000f0 {
compatible = "ns16550a";
- reg = <0xf0 0x8>;
+ reg = <0x400000f0 0x8>;
interrupts = <19>;
interrupt-parent = <&vic0>;
clock-frequency = <1846153>;
reg-shift = <0>;
};
- usb0: usb@efe0000 {
+ usb0: usb@4efe0000 {
compatible = "hpe,gxp-ehci", "generic-ehci";
- reg = <0xefe0000 0x100>;
+ reg = <0x4efe0000 0x100>;
interrupts = <7>;
interrupt-parent = <&vic0>;
};
- st: timer@80 {
+ st: timer@40000080 {
compatible = "hpe,gxp-timer";
- reg = <0x80 0x16>;
+ reg = <0x40000080 0x16>;
interrupts = <0>;
interrupt-parent = <&vic0>;
clocks = <&iopclk>;
clock-names = "iop";
};
- usb1: usb@efe0100 {
+ usb1: usb@4efe0100 {
compatible = "hpe,gxp-ohci", "generic-ohci";
- reg = <0xefe0100 0x110>;
+ reg = <0x4efe0100 0x110>;
interrupts = <6>;
interrupt-parent = <&vic0>;
};
+
+ sysreg_system_controller: syscon@400000f8 {
+ compatible = "hpe,gxp-sysreg", "syscon";
+ reg = <0x400000f8 0x8>;
+ };
+
+ sysreg_system_controller2: syscon@51000319 {
+ compatible = "hpe,gxp-sysreg", "syscon";
+ reg = <0x51000319 0x4>;
+ };
+
+ i2c0: i2c@40002000 {
+ compatible = "hpe,gxp-i2c";
+ reg = <0x40002000 0x70>;
+ interrupts = <9>;
+ interrupt-parent = <&vic0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ hpe,sysreg = <&sysreg_system_controller>;
+ clock-frequency = <100000>;
+ };
+
+ i2c1: i2c@40002100 {
+ compatible = "hpe,gxp-i2c";
+ reg = <0x40002100 0x70>;
+ interrupts = <9>;
+ interrupt-parent = <&vic0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ hpe,sysreg = <&sysreg_system_controller>;
+ clock-frequency = <100000>;
+ };
+
+ i2c2: i2c@40002200 {
+ compatible = "hpe,gxp-i2c";
+ reg = <0x40002200 0x70>;
+ interrupts = <9>;
+ interrupt-parent = <&vic0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ hpe,sysreg = <&sysreg_system_controller>;
+ clock-frequency = <100000>;
+ };
+
+ i2c3: i2c@40002300 {
+ compatible = "hpe,gxp-i2c";
+ reg = <0x40002300 0x70>;
+ interrupts = <9>;
+ interrupt-parent = <&vic0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ hpe,sysreg = <&sysreg_system_controller>;
+ clock-frequency = <100000>;
+ };
+
+ i2c4: i2c@40002400 {
+ compatible = "hpe,gxp-i2c";
+ reg = <0x40002400 0x70>;
+ interrupts = <9>;
+ interrupt-parent = <&vic0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ hpe,sysreg = <&sysreg_system_controller>;
+ clock-frequency = <100000>;
+ };
+
+ i2c5: i2c@40002500 {
+ compatible = "hpe,gxp-i2c";
+ reg = <0x40002500 0x70>;
+ interrupts = <9>;
+ interrupt-parent = <&vic0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ hpe,sysreg = <&sysreg_system_controller>;
+ clock-frequency = <100000>;
+ };
+
+ i2c6: i2c@40002600 {
+ compatible = "hpe,gxp-i2c";
+ reg = <0x40002600 0x70>;
+ interrupts = <9>;
+ interrupt-parent = <&vic0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ hpe,sysreg = <&sysreg_system_controller>;
+ clock-frequency = <100000>;
+ };
+
+ i2c7: i2c@40002700 {
+ compatible = "hpe,gxp-i2c";
+ reg = <0x40002700 0x70>;
+ interrupts = <9>;
+ interrupt-parent = <&vic0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ hpe,sysreg = <&sysreg_system_controller>;
+ clock-frequency = <100000>;
+ };
+
+ i2c8: i2c@40002800 {
+ compatible = "hpe,gxp-i2c";
+ reg = <0x40002800 0x70>;
+ interrupts = <9>;
+ interrupt-parent = <&vic0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ hpe,sysreg = <&sysreg_system_controller>;
+ clock-frequency = <100000>;
+ };
+
+ i2c9: i2c@40002900 {
+ compatible = "hpe,gxp-i2c";
+ reg = <0x40002900 0x70>;
+ interrupts = <9>;
+ interrupt-parent = <&vic0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ hpe,sysreg = <&sysreg_system_controller>;
+ clock-frequency = <100000>;
+ };
+
+ fan-controller@40000c10 { /* 0xc0000c10 */
+ compatible = "hpe,gxp-fan-ctrl";
+ reg = <0x40000c10 0x8>, <0x51000327 0x06>;
+ reg-names = "base", "pl";
+ };
+
+ gpio: gpio@0 {
+ compatible = "hpe,gxp-gpio";
+ reg = <0x0 0x400>, <0x200046 0x1>, <0x200070 0x08>,
+ <0x400064 0x80>, <0x5100030f 0x1>;
+ reg-names = "csm", "fn2-vbtn", "fn2-stat", "vuhc", "vbtn";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0>;
+ interrupt-parent = <&vic1>;
+ };
+
+ gpio1: gpio@51000304 {
+ compatible = "hpe,gxp-gpio-pl";
+ reg = <0x51000304 0x2>, <0x5100030d 0x01>, <0x51000380 0x7f>;
+ reg-names = "pl-led", "pl-health", "pl-int";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <26>;
+ interrupt-parent = <&vic0>;
+ };
};
};
};
--
2.17.1
[PATCH v1 7/9] ARM: dts: gxp: add psu, i2c, gpio
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [PATCH v1 7/9] ARM: dts: gxp: add psu, i2c, gpio
- From: nick.hawkins@xxxxxxx
- Date: Tue, 18 Apr 2023 10:28:22 -0500
- In-reply-to: <20230418152824.110823-1-nick.hawkins@hpe.com>
- References: <20230418152824.110823-1-nick.hawkins@hpe.com>
- Follow-Ups:
- Re: [PATCH v1 7/9] ARM: dts: gxp: add psu, i2c, gpio
- From: Krzysztof Kozlowski
- Re: [PATCH v1 7/9] ARM: dts: gxp: add psu, i2c, gpio
- References:
- [PATCH v1 0/9] ARM: Add GPIO and PSU Support
- From: nick . hawkins
- [PATCH v1 0/9] ARM: Add GPIO and PSU Support
- Prev by Date: [PATCH v1 4/9] dt-bindings: hwmon: Modify hpe,gxp-fan-ctrl
- Next by Date: [PATCH v1 6/9] dt-bindings: hwmon: Add HPE GXP PSU Support
- Previous by thread: Re: [PATCH v1 4/9] dt-bindings: hwmon: Modify hpe,gxp-fan-ctrl
- Next by thread: Re: [PATCH v1 7/9] ARM: dts: gxp: add psu, i2c, gpio
- Index(es):
 |