Re: [PATCH net-next v2 5/6] net: txgbe: Implement phylink pcs

["Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>]

On Tue, Apr 11, 2023 at 05:27:24PM +0800, Jiawen Wu wrote:
> +static void txgbe_set_an37_ability(struct txgbe *txgbe)
> +{
> +     u16 val;
> +
> +     pcs_write(txgbe, MDIO_MMD_PCS, TXGBE_PCS_DIG_CTRL1,
> +               TXGBE_PCS_DIG_CTRL1_EN_VSMMD1 |
> +               TXGBE_PCS_DIG_CTRL1_CLS7_BP |
> +               TXGBE_PCS_DIG_CTRL1_BYP_PWRUP);
> +     pcs_write(txgbe, MDIO_MMD_VEND2, TXGBE_MII_AN_CTRL,
> +               TXGBE_MII_AN_CTRL_MII |
> +               TXGBE_MII_AN_CTRL_TXCFG |
> +               TXGBE_MII_AN_CTRL_PCS_MODE(0) |
> +               TXGBE_MII_AN_CTRL_INTR_EN);
> +     pcs_write(txgbe, MDIO_MMD_VEND2, TXGBE_MII_DIG_CTRL1,
> +               TXGBE_MII_DIG_CTRL1_MAC_AUTOSW);
> +     val = pcs_read(txgbe, MDIO_MMD_VEND2, MDIO_CTRL1);
> +     val |= BMCR_ANRESTART | BMCR_ANENABLE;

	val |= BMCR_ANENABLE;

> +     pcs_write(txgbe, MDIO_MMD_VEND2, MDIO_CTRL1, val);
> +}

> +static void txgbe_setup_adv(struct txgbe *txgbe, phy_interface_t interface,
> +			    const unsigned long *advertising)

Please return an int.

> +{
> +	int adv;
> +
> +	adv = phylink_mii_c22_pcs_encode_advertisement(interface,
> +						       advertising);

	if (adv < 0)
		return adv;

> +	if (adv > 0)
> +		mdiodev_c45_modify(txgbe->mdiodev, MDIO_MMD_VEND2, MII_ADVERTISE,
> +				   0xffff, adv);

	return mdiodev_c45_modify_changed(txgbe->mdiodev, MDIO_MMD_VEND2,
					  MII_ADVERTISE, 0xffff, adv);

> +}
> +
> +static int txgbe_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
> +			    phy_interface_t interface,
> +			    const unsigned long *advertising,
> +			    bool permit_pause_to_mac)
> +{
> +	struct txgbe *txgbe = container_of(pcs, struct txgbe, pcs);
> +	struct wx *wx = txgbe->wx;
> +	int ret, val;
> +
> +	if (interface == txgbe->interface)
> +		goto out;
> +
> +	/* Wait xpcs power-up good */
> +	ret = read_poll_timeout(pcs_read, val,
> +				(val & TXGBE_PCS_DIG_STS_PSEQ_ST) ==
> +				TXGBE_PCS_DIG_STS_PSEQ_ST_GOOD,
> +				10000, 1000000, false,
> +				txgbe, MDIO_MMD_PCS, TXGBE_PCS_DIG_STS);
> +	if (ret < 0) {
> +		wx_err(wx, "xpcs power-up timeout.\n");
> +		return ret;
> +	}
> +
> +	/* Disable xpcs AN-73 */
> +	pcs_write(txgbe, MDIO_MMD_AN, MDIO_CTRL1, 0);
> +
> +	/* Disable PHY MPLLA for eth mode change(after ECO) */
> +	txgbe_ephy_write(txgbe, TXGBE_SUP_DIG_MPLLA_OVRD_IN_0, 0x243A);
> +	WX_WRITE_FLUSH(wx);
> +	usleep_range(1000, 2000);
> +
> +	/* Set the eth change_mode bit first in mis_rst register
> +	 * for corresponding LAN port
> +	 */
> +	wr32(wx, TXGBE_MIS_RST, TXGBE_MIS_RST_LAN_ETH_MODE(wx->bus.func));
> +
> +	switch (interface) {
> +	case PHY_INTERFACE_MODE_10GBASER:
> +		txgbe_pma_config_10gbaser(txgbe);
> +		break;
> +	case PHY_INTERFACE_MODE_1000BASEX:
> +		txgbe_pma_config_1000basex(txgbe);
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	pcs_write(txgbe, MDIO_MMD_PCS, TXGBE_PCS_DIG_CTRL1,
> +		  TXGBE_PCS_DIG_CTRL1_VR_RST | TXGBE_PCS_DIG_CTRL1_EN_VSMMD1);
> +	/* wait phy initialization done */
> +	ret = read_poll_timeout(pcs_read, val,
> +				!(val & TXGBE_PCS_DIG_CTRL1_VR_RST),
> +				100000, 10000000, false,
> +				txgbe, MDIO_MMD_PCS, TXGBE_PCS_DIG_CTRL1);
> +	if (ret < 0)
> +		wx_err(wx, "PHY initialization timeout.\n");
> +
> +	txgbe->interface = interface;
> +
> +out:
> +	if (interface == PHY_INTERFACE_MODE_1000BASEX) {
> +		txgbe_setup_adv(txgbe, interface, advertising);

		ret = txgbe_setup_adv(txgbe, interface, advertising);
		if (ret < 0)
			return ret;

> +		txgbe_set_an37_ability(txgbe);
> +	}
> +
> +	return ret;

... and then this will propagate whether the advertisement has changed,
which will then cause...

> +static void txgbe_pcs_an_restart(struct phylink_pcs *pcs)
> +{
> +	struct txgbe *txgbe = container_of(pcs, struct txgbe, pcs);
> +
> +	mdiodev_c45_modify(txgbe->mdiodev, MDIO_MMD_VEND2, MDIO_CTRL1,
> +			   BMCR_ANRESTART, BMCR_ANRESTART);
> +}

to be called whenever the advertisement changes (which is why you
then don't need to do it in txgbe_set_an37_ability().)

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!