Re: [PATCH v2 15/15] arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes

[Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>]

On 20.03.2023 16:48, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> 
> Add GPIO controller nodes to PMICs that have the GPIO hooked up on
> sa8775p-ride.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
Only on 2 out of 4 SIDs?

Konrad
>  arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> index 276070b62ccd..574c20caf9eb 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> @@ -78,6 +78,16 @@ pmm8654au_0_pon_resin: resin {
>  				status = "disabled";
>  			};
>  		};
> +
> +		pmm8654au_0_gpios: gpio@8800 {
> +			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
> +			reg = <0x8800>;
> +			gpio-controller;
> +			gpio-ranges = <&pmm8654au_0_gpios 0 0 12>;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
>  	};
>  
>  	pmm8654au_1: pmic@2 {
> @@ -99,6 +109,16 @@ pmm8654au_2: pmic@4 {
>  		reg = <0x4 SPMI_USID>;
>  		#address-cells = <1>;
>  		#size-cells = <0>;
> +
> +		pmm8654au_2_gpios: gpio@8800 {
> +			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
> +			reg = <0x8800>;
> +			gpio-controller;
> +			gpio-ranges = <&pmm8654au_2_gpios 0 0 12>;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
>  	};
>  
>  	pmm8654au_3: pmic@6 {