Re: [PATCH v2 01/15] arm64: dts: qcom: sa8775p: pad reg properties to 8 digits

[Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>]

On 20.03.2023 16:48, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> 
> The file has inconsistent padding of the address part of soc node
> children's reg properties. Fix it.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  arch/arm64/boot/dts/qcom/sa8775p.dtsi | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index c5b73c591e0f..5aa28a3b12ae 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -440,7 +440,7 @@ soc: soc@0 {
>  
>  		gcc: clock-controller@100000 {
>  			compatible = "qcom,sa8775p-gcc";
> -			reg = <0x0 0x100000 0x0 0xc7018>;
> +			reg = <0x0 0x00100000 0x0 0xc7018>;
>  			#clock-cells = <1>;
>  			#reset-cells = <1>;
>  			#power-domain-cells = <1>;
> @@ -464,7 +464,7 @@ gcc: clock-controller@100000 {
>  
>  		ipcc: mailbox@408000 {
>  			compatible = "qcom,sa8775p-ipcc", "qcom,ipcc";
> -			reg = <0x0 0x408000 0x0 0x1000>;
> +			reg = <0x0 0x00408000 0x0 0x1000>;
>  			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-controller;
>  			#interrupt-cells = <3>;
> @@ -473,7 +473,7 @@ ipcc: mailbox@408000 {
>  
>  		qupv3_id_1: geniqup@ac0000 {
>  			compatible = "qcom,geni-se-qup";
> -			reg = <0x0 0xac0000 0x0 0x6000>;
> +			reg = <0x0 0x00ac0000 0x0 0x6000>;
>  			#address-cells = <2>;
>  			#size-cells = <2>;
>  			ranges;
> @@ -485,7 +485,7 @@ qupv3_id_1: geniqup@ac0000 {
>  
>  			uart10: serial@a8c000 {
>  				compatible = "qcom,geni-uart";
> -				reg = <0x0 0xa8c000 0x0 0x4000>;
> +				reg = <0x0 0x00a8c000 0x0 0x4000>;
>  				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>  				clock-names = "se";
>  				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> @@ -735,7 +735,7 @@ rpmhpd_opp_turbo_l1: opp-9 {
>  
>  		tcsr_mutex: hwlock@1f40000 {
>  			compatible = "qcom,tcsr-mutex";
> -			reg = <0x0 0x1f40000 0x0 0x20000>;
> +			reg = <0x0 0x01f40000 0x0 0x20000>;
>  			#hwlock-cells = <1>;
>  		};
>  
> @@ -754,7 +754,7 @@ cpufreq_hw: cpufreq@18591000 {
>  
>  		tlmm: pinctrl@f000000 {
>  			compatible = "qcom,sa8775p-tlmm";
> -			reg = <0x0 0xf000000 0x0 0x1000000>;
> +			reg = <0x0 0x0f000000 0x0 0x1000000>;
>  			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>  			gpio-controller;
>  			#gpio-cells = <2>;