Re: [PATCH 07/14] arm64: dts: qcom: sa8775p: add the Power On device node

[Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>]

On 14.03.2023 19:30, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> 
> Add the PON node to PMIC #0 for sa8775p platforms.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> index 77e2515a7ab9..5d73212fbd16 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> @@ -12,6 +12,13 @@ pmk8775_0: pmic@0 {
>  		reg = <0x0 SPMI_USID>;
>  		#address-cells = <1>;
>  		#size-cells = <0>;
> +
> +		pmk8775_0_pon: pon@1200 {
> +			compatible = "qcom,pmk8350-pon";
> +			reg = <0x1200>, <0x800>;
reg-names = "hlos", "pbs"

Also, are you sure hlos shouldn't be @1300?

Konrad
> +			mode-recovery = <0x1>;
> +			mode-bootloader = <0x2>;
> +		};
>  	};
>  
>  	pmk8775_1: pmic@2 {