Re: [PATCH 03/14] arm64: dts: qcom: sa8775p: add the spmi node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 14.03.2023 19:30, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> 
> Add the SPMI PMIC Arbiter node for SA8775p platforms.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p.dtsi | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index 428d9e0849b8..22c98ebc4c46 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -943,6 +943,24 @@ apps_smmu: iommu@15000000 {
>  		};
>  	};
>  
> +	spmi_bus: spmi@c440000 {
> +		compatible = "qcom,spmi-pmic-arb";
> +		reg = <0x0 0x0c440000 0x0 0x1100>,
> +		      <0x0 0x0c600000 0x0 0x2000000>,
> +		      <0x0 0x0e600000 0x0 0x100000>,
> +		      <0x0 0x0e700000 0x0 0xa0000>,
> +		      <0x0 0x0c40a000 0x0 0x26000>;
> +		reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
Please make this a vertical list and sort the node properly.

lgtm otherwise

Konrad
> +		qcom,channel = <0>;
> +		qcom,ee = <0>;
> +		interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "periph_irq";
> +		interrupt-controller;
> +		#interrupt-cells = <4>;
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +	};
> +
>  	arch_timer: timer {
>  		compatible = "arm,armv8-timer";
>  		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux