Add the SGPIO controller to the NPCM7xx devicetree Signed-off-by: Jim Liu <jim.t90615@xxxxxxxxx> --- Changes for v5: - remove npcm8xx node Changes for v4: - add npcm8xx gpio node Changes for v3: - modify node name - modify in/out property name Changes for v2: - modify dts node --- arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 30 +++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi index c7b5ef15b716..7f53774a01ec 100644 --- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi +++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi @@ -330,6 +330,36 @@ status = "disabled"; }; + gpio8: gpio@101000 { + compatible = "nuvoton,npcm750-sgpio"; + reg = <0x101000 0x200>; + clocks = <&clk NPCM7XX_CLK_APB3>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <8000000>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&iox1_pins>; + nuvoton,input-ngpios = <64>; + nuvoton,output-ngpios = <64>; + status = "disabled"; + }; + + gpio9: gpio@102000 { + compatible = "nuvoton,npcm750-sgpio"; + reg = <0x102000 0x200>; + clocks = <&clk NPCM7XX_CLK_APB3>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <8000000>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&iox2_pins>; + nuvoton,input-ngpios = <64>; + nuvoton,output-ngpios = <64>; + status = "disabled"; + }; + pwm_fan: pwm-fan-controller@103000 { #address-cells = <1>; #size-cells = <0>; -- 2.17.1