[PATCH 2/2] dt-bindings: pinctrl: Move k3.h to arch

[Nishanth Menon <nm@xxxxxx>]

Move the k3 pinctrl definition to arch dts folder.

While at this, fixup MAINTAINERS and header guard macro to better
reflect the changes.

Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Suggested-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Link: https://lore.kernel.org/all/c4d53e9c-dac0-8ccc-dc86-faada324beba@xxxxxxxxxx/
Signed-off-by: Nishanth Menon <nm@xxxxxx>
---

There is no specific case I can think of at the moment to create a
pinctrl.dtsi for the SoCs.. So, unlike other SoCs, I had not done that
in the series, if folks have a better opinion about this, please let us
discuss.

 MAINTAINERS                                                 | 1 -
 arch/arm64/boot/dts/ti/k3-am62.dtsi                         | 3 ++-
 arch/arm64/boot/dts/ti/k3-am62a.dtsi                        | 3 ++-
 arch/arm64/boot/dts/ti/k3-am64.dtsi                         | 3 ++-
 arch/arm64/boot/dts/ti/k3-am65.dtsi                         | 3 ++-
 arch/arm64/boot/dts/ti/k3-j7200.dtsi                        | 3 ++-
 arch/arm64/boot/dts/ti/k3-j721e.dtsi                        | 3 ++-
 arch/arm64/boot/dts/ti/k3-j721s2.dtsi                       | 3 ++-
 arch/arm64/boot/dts/ti/k3-j784s4.dtsi                       | 3 ++-
 .../pinctrl/k3.h => arch/arm64/boot/dts/ti/k3-pinctrl.h     | 6 +++---
 10 files changed, 19 insertions(+), 12 deletions(-)
 rename include/dt-bindings/pinctrl/k3.h => arch/arm64/boot/dts/ti/k3-pinctrl.h (94%)

diff --git a/MAINTAINERS b/MAINTAINERS
index 2892858cb040..442ac29e1fce 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2933,7 +2933,6 @@ F:	Documentation/devicetree/bindings/arm/ti/k3.yaml
 F:	Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml
 F:	arch/arm64/boot/dts/ti/Makefile
 F:	arch/arm64/boot/dts/ti/k3-*
-F:	include/dt-bindings/pinctrl/k3.h
 
 ARM/TOSHIBA VISCONTI ARCHITECTURE
 M:	Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi
index 37fcbe7a3c33..a401f5225243 100644
--- a/arch/arm64/boot/dts/ti/k3-am62.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi
@@ -8,9 +8,10 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 AM625 SoC";
 	compatible = "ti,am625";
diff --git a/arch/arm64/boot/dts/ti/k3-am62a.dtsi b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
index 6eb87c3f9f3c..fe60c9ce21e3 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
@@ -8,9 +8,10 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 AM62A SoC";
 	compatible = "ti,am62a7";
diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi
index c858725133af..60fe95b48312 100644
--- a/arch/arm64/boot/dts/ti/k3-am64.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi
@@ -8,9 +8,10 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 AM642 SoC";
 	compatible = "ti,am642";
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
index c538a0bf3cdd..3093ef6b9b23 100644
--- a/arch/arm64/boot/dts/ti/k3-am65.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -8,9 +8,10 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 AM654 SoC";
 	compatible = "ti,am654";
diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
index d74f86b0f622..bbe380c72a7e 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
@@ -7,9 +7,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 J7200 SoC";
 	compatible = "ti,j7200";
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index 6975cae644d9..4c7d5f9d61a8 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -7,9 +7,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 J721E SoC";
 	compatible = "ti,j721e";
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
index 78295ee0fee5..376924726f1f 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
@@ -10,9 +10,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 
 	model = "Texas Instruments K3 J721S2 SoC";
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
index 3eb0d0568959..2e03d84da7d2 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
@@ -10,9 +10,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 J784S4 SoC";
 	compatible = "ti,j784s4";
diff --git a/include/dt-bindings/pinctrl/k3.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
similarity index 94%
rename from include/dt-bindings/pinctrl/k3.h
rename to arch/arm64/boot/dts/ti/k3-pinctrl.h
index 469bd29651db..6004e0967ec5 100644
--- a/include/dt-bindings/pinctrl/k3.h
+++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
@@ -3,10 +3,10 @@
  * This header provides constants for pinctrl bindings for TI's K3 SoC
  * family.
  *
- * Copyright (C) 2018-2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
  */
-#ifndef _DT_BINDINGS_PINCTRL_TI_K3_H
-#define _DT_BINDINGS_PINCTRL_TI_K3_H
+#ifndef DTS_ARM64_TI_K3_PINCTRL_H
+#define DTS_ARM64_TI_K3_PINCTRL_H
 
 #define PULLUDEN_SHIFT		(16)
 #define PULLTYPESEL_SHIFT	(17)
-- 
2.37.2