Re: [PATCH INTERNAL v1 3/3] regulator: tps6594-regulator: Add driver for TI TPS6594 regulators
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
On 24/02/2023 15:05, Matti Vaittinen wrote:
Hi Esteban,
On 2/24/23 15:31, Esteban Blanc wrote:
From: Jerome Neanne <jneanne@xxxxxxxxxxxx>
This patch adds support for TPS6594 regulators (bucks and LDOs).
The output voltages are configurable and are meant to supply power
to the main processor and other components.
Bucks can be used in single or multiphase mode, depending on PMIC
part number.
Signed-off-by: Jerome Neanne <jneanne@xxxxxxxxxxxx>
---
drivers/regulator/Kconfig | 12 +
drivers/regulator/Makefile | 1 +
drivers/regulator/tps6594-regulator.c | 559 ++++++++++++++++++++++++++
3 files changed, 572 insertions(+)
create mode 100644 drivers/regulator/tps6594-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 820c9a0788e5..921540af6958 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1432,6 +1432,18 @@ config REGULATOR_TPS65219
voltage regulators. It supports software based voltage control
for different voltage domains.
+config REGULATOR_TPS6594
+ tristate "TI TPS6594 Power regulators"
+ depends on MFD_TPS6594 && OF
+ help
+ This driver supports TPS6594 voltage regulator chips.
+ TPS6594 series of PMICs have 5 BUCKs and 4 LDOs
+ voltage regulators.
+ BUCKs 1,2,3,4 can be used in single phase or multiphase mode.
+ Part number defines which single or multiphase mode is i used.
+ It supports software based voltage control
+ for different voltage domains.
+
config REGULATOR_TPS6524X
tristate "TI TPS6524X Power regulators"
depends on SPI
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index b9f5eb35bf5f..948b53f6156b 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -171,6 +171,7 @@ obj-$(CONFIG_REGULATOR_TPS6524X) +=
tps6524x-regulator.o
obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o
obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
+obj-$(CONFIG_REGULATOR_TPS6594) += tps6594-regulator.o
obj-$(CONFIG_REGULATOR_TPS65132) += tps65132-regulator.o
obj-$(CONFIG_REGULATOR_TPS68470) += tps68470-regulator.o
obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o twl6030-regulator.o
diff --git a/drivers/regulator/tps6594-regulator.c
b/drivers/regulator/tps6594-regulator.c
new file mode 100644
index 000000000000..c099711fd460
--- /dev/null
+++ b/drivers/regulator/tps6594-regulator.c
@@ -0,0 +1,559 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Regulator driver for tps6594 PMIC
+ *
+ * Copyright (C) 2022 BayLibre Incorporated - https://www.baylibre.com/
+ *
+ * This implementation derived from tps65218 authored by "J Keerthy
<j-keerthy@xxxxxx>"
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+#include <linux/mfd/tps6594.h>
+
+#define BUCK_NB 5
+#define LDO_NB 4
+#define MULTI_PHASE_NB 4
+
+enum tps6594_regulator_id {
+ /* DCDC's */
+ TPS6594_BUCK_1,
+ TPS6594_BUCK_2,
+ TPS6594_BUCK_3,
+ TPS6594_BUCK_4,
+ TPS6594_BUCK_5,
+
+ /* LDOs */
+ TPS6594_LDO_1,
+ TPS6594_LDO_2,
+ TPS6594_LDO_3,
+ TPS6594_LDO_4,
+};
+
+enum tps6594_multi_regulator_id {
+ /* Multi-phase DCDC's */
+ TPS6594_BUCK_12,
+ TPS6594_BUCK_34,
+ TPS6594_BUCK_123,
+ TPS6594_BUCK_1234,
+};
+
+struct tps6594_regulator_irq_type {
+ const char *irq_name;
+ const char *regulator_name;
+ const char *event_name;
+ unsigned long event;
+};
+
+static struct tps6594_regulator_irq_type
tps6594_regulator_irq_types[] = {
+ { TPS6594_IRQ_NAME_BUCK1_OV, "BUCK1", "overvoltage",
REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+ { TPS6594_IRQ_NAME_BUCK1_UV, "BUCK1", "undervoltage",
REGULATOR_EVENT_UNDER_VOLTAGE },
You have warning level IRQs - which is cool :)
As warning level IRQs are used for non fatal errors, you probably would
like to also implement a mechanism for consumers to know when the
"warning is over" (assuming the HW provides the status information).
Maybe regulator_get_error_flags() would serve you?
I'd be _really_ interested in hearing if you already have a use-case for
the warnings.
I double checked with TI PMIC team and so far we don't have any routine.
The requirement for upstream driver is to raise the warning to the
processor nothing else. Up to the final customer to customize further.
Note that it can be dangerous to handle in sw it in a generic way since
those warnings might affect some regulators that is supplying some
resources needed by the processor for correct behavior...
+ { TPS6594_IRQ_NAME_BUCK1_SC, "BUCK1", "short circuit",
REGULATOR_EVENT_REGULATION_OUT },
+ { TPS6594_IRQ_NAME_BUCK1_ILIM, "BUCK1", "reach ilim, overcurrent",
+ REGULATOR_EVENT_OVER_CURRENT },
+ { TPS6594_IRQ_NAME_BUCK2_OV, "BUCK2", "overvoltage",
REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+ { TPS6594_IRQ_NAME_BUCK2_UV, "BUCK2", "undervoltage",
REGULATOR_EVENT_UNDER_VOLTAGE },
+ { TPS6594_IRQ_NAME_BUCK2_SC, "BUCK2", "short circuit",
REGULATOR_EVENT_REGULATION_OUT },
+ { TPS6594_IRQ_NAME_BUCK2_ILIM, "BUCK2", "reach ilim, overcurrent",
+ REGULATOR_EVENT_OVER_CURRENT },
+ { TPS6594_IRQ_NAME_BUCK3_OV, "BUCK3", "overvoltage",
REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+ { TPS6594_IRQ_NAME_BUCK3_UV, "BUCK3", "undervoltage",
REGULATOR_EVENT_UNDER_VOLTAGE },
+ { TPS6594_IRQ_NAME_BUCK3_SC, "BUCK3", "short circuit",
REGULATOR_EVENT_REGULATION_OUT },
+ { TPS6594_IRQ_NAME_BUCK3_ILIM, "BUCK3", "reach ilim, overcurrent",
+ REGULATOR_EVENT_OVER_CURRENT },
+ { TPS6594_IRQ_NAME_BUCK4_OV, "BUCK4", "overvoltage",
REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+ { TPS6594_IRQ_NAME_BUCK4_UV, "BUCK4", "undervoltage",
REGULATOR_EVENT_UNDER_VOLTAGE },
+ { TPS6594_IRQ_NAME_BUCK4_SC, "BUCK4", "short circuit",
REGULATOR_EVENT_REGULATION_OUT },
+ { TPS6594_IRQ_NAME_BUCK4_ILIM, "BUCK4", "reach ilim, overcurrent",
+ REGULATOR_EVENT_OVER_CURRENT },
+ { TPS6594_IRQ_NAME_BUCK5_OV, "BUCK5", "overvoltage",
REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+ { TPS6594_IRQ_NAME_BUCK5_UV, "BUCK5", "undervoltage",
REGULATOR_EVENT_UNDER_VOLTAGE },
+ { TPS6594_IRQ_NAME_BUCK5_SC, "BUCK5", "short circuit",
REGULATOR_EVENT_REGULATION_OUT },
+ { TPS6594_IRQ_NAME_BUCK5_ILIM, "BUCK5", "reach ilim, overcurrent",
+ REGULATOR_EVENT_OVER_CURRENT },
+ { TPS6594_IRQ_NAME_LDO1_OV, "LDO1", "overvoltage",
REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+ { TPS6594_IRQ_NAME_LDO1_UV, "LDO1", "undervoltage",
REGULATOR_EVENT_UNDER_VOLTAGE },
+ { TPS6594_IRQ_NAME_LDO1_SC, "LDO1", "short circuit",
REGULATOR_EVENT_REGULATION_OUT },
+ { TPS6594_IRQ_NAME_LDO1_ILIM, "LDO1", "reach ilim, overcurrent",
+ REGULATOR_EVENT_OVER_CURRENT },
+ { TPS6594_IRQ_NAME_LDO2_OV, "LDO2", "overvoltage",
REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+ { TPS6594_IRQ_NAME_LDO2_UV, "LDO2", "undervoltage",
REGULATOR_EVENT_UNDER_VOLTAGE },
+ { TPS6594_IRQ_NAME_LDO2_SC, "LDO2", "short circuit",
REGULATOR_EVENT_REGULATION_OUT },
+ { TPS6594_IRQ_NAME_LDO2_ILIM, "LDO2", "reach ilim, overcurrent",
+ REGULATOR_EVENT_OVER_CURRENT },
+ { TPS6594_IRQ_NAME_LDO3_OV, "LDO3", "overvoltage",
REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+ { TPS6594_IRQ_NAME_LDO3_UV, "LDO3", "undervoltage",
REGULATOR_EVENT_UNDER_VOLTAGE },
+ { TPS6594_IRQ_NAME_LDO3_SC, "LDO3", "short circuit",
REGULATOR_EVENT_REGULATION_OUT },
+ { TPS6594_IRQ_NAME_LDO3_ILIM, "LDO3", "reach ilim, overcurrent",
+ REGULATOR_EVENT_OVER_CURRENT },
+ { TPS6594_IRQ_NAME_LDO4_OV, "LDO4", "overvoltage",
REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+ { TPS6594_IRQ_NAME_LDO4_UV, "LDO4", "undervoltage",
REGULATOR_EVENT_UNDER_VOLTAGE },
+ { TPS6594_IRQ_NAME_LDO4_SC, "LDO4", "short circuit",
REGULATOR_EVENT_REGULATION_OUT },
+ { TPS6594_IRQ_NAME_LDO4_ILIM, "LDO4", "reach ilim, overcurrent",
+ REGULATOR_EVENT_OVER_CURRENT },
+};
+
+static struct tps6594_regulator_irq_type
tps6594_ext_regulator_irq_types[] = {
+ { TPS6594_IRQ_NAME_VCCA_OV, "VCCA", "overvoltage",
REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+ { TPS6594_IRQ_NAME_VCCA_UV, "VCCA", "undervoltage",
REGULATOR_EVENT_UNDER_VOLTAGE },
+ { TPS6594_IRQ_NAME_VMON1_OV, "VMON1", "overvoltage",
REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+ { TPS6594_IRQ_NAME_VMON1_UV, "VMON1", "undervoltage",
REGULATOR_EVENT_UNDER_VOLTAGE },
+ { TPS6594_IRQ_NAME_VMON1_RV, "VMON1", "residual voltage",
+ REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+ { TPS6594_IRQ_NAME_VMON2_OV, "VMON2", "overvoltage",
REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+ { TPS6594_IRQ_NAME_VMON2_UV, "VMON2", "undervoltage",
REGULATOR_EVENT_UNDER_VOLTAGE },
+ { TPS6594_IRQ_NAME_VMON2_RV, "VMON2", "residual voltage",
+ REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+};
+
+struct tps6594_regulator_irq_data {
+ struct device *dev;
+ struct tps6594_regulator_irq_type *type;
+ struct regulator_dev *rdev;
+};
+
+struct tps6594_ext_regulator_irq_data {
+ struct device *dev;
+ struct tps6594_regulator_irq_type *type;
+};
+
+ for (i = 0; i < ARRAY_SIZE(tps6594_regulator_irq_types); ++i) {
+ irq_type = &tps6594_regulator_irq_types[i];
+
+ irq = platform_get_irq_byname(pdev, irq_type->irq_name);
+ if (irq < 0)
+ return -EINVAL;
+
+ irq_data[i].dev = tps->dev;
+ irq_data[i].type = irq_type;
+
+ tps6594_get_rdev_by_name(irq_type->regulator_name, rdevbucktbl,
+ rdevldotbl, rdev);
+
+ if (rdev < 0) {
+ dev_err(tps->dev, "Failed to get rdev for %s\n",
+ irq_type->regulator_name);
+ return -EINVAL;
+ }
+ irq_data[i].rdev = rdev;
+
+ error = devm_request_threaded_irq(tps->dev, irq, NULL,
+ tps6594_regulator_irq_handler,
+ IRQF_ONESHOT,
+ irq_type->irq_name,
+ &irq_data[i]);
+ if (error) {
+ dev_err(tps->dev, "failed to request %s IRQ %d: %d\n",
+ irq_type->irq_name, irq, error);
+ return error;
+ }
+ }
If I read this correctly, you have exact, 1 to 1 mapping from an IRQ to
regulator and event? Maybe you could slightly simplify the driver by
using the devm_regulator_irq_helper() and
regulator_irq_map_event_simple() with it's map-event? And if the
devm_regulator_irq_helper() does not work for you I'll be interested in
hearing if it could be improved.
I'll give it a try.
Thanks
[Index of Archives]
[Linux SPI]
[Linux Kernel]
[Linux ARM (vger)]
[Linux ARM MSM]
[Linux Omap]
[Linux Arm]
[Linux Tegra]
[Fedora ARM]
[Linux for Samsung SOC]
[eCos]
[Linux Fastboot]
[Gcc Help]
[Git]
[DCCP]
[IETF Announce]
[Security]
[Linux MIPS]
[Yosemite Campsites]
|