From: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
The RT3352 and RT5350 SoCs each contain different pin muxing information,
therefore, should be split. This can be done now that there are compatible
strings to distinguish them from other SoCs.
Split the schema out to ralink,rt3352-pinctrl.yaml and
ralink,rt5350-pinctrl.yaml.
Remove ralink,rt3352-pinctrl and ralink,rt5350-pinctrl from rt305x.
Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
---
.../pinctrl/ralink,rt305x-pinctrl.yaml | 83 +-----
.../pinctrl/ralink,rt3352-pinctrl.yaml | 243 ++++++++++++++++++
.../pinctrl/ralink,rt5350-pinctrl.yaml | 206 +++++++++++++++
3 files changed, 455 insertions(+), 77 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt3352-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt5350-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
index 55c6f9826e76..95a904273009 100644
--- a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
@@ -11,17 +11,13 @@ maintainers:
- Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
description: |
- Ralink RT305X pin controller for RT3050, RT3052, RT3350, RT3352 and RT5350
- SoCs.
+ Ralink RT305X pin controller for RT3050, RT3052, and RT3350 SoCs.
The pin controller can only set the muxing of pin groups. Muxing individual
pins is not supported. There is no pinconf support.
properties:
compatible:
- enum:
- - ralink,rt305x-pinctrl
- - ralink,rt3352-pinctrl
- - ralink,rt5350-pinctrl
+ const: ralink,rt305x-pinctrl
patternProperties:
'-pins$':
@@ -39,21 +35,9 @@ patternProperties:
function:
description:
A string containing the name of the function to mux to the group.
- anyOf:
- - description: For RT3050, RT3052 and RT3350 SoCs
- enum: [gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, mdio,
- pcm gpio, pcm i2s, pcm uartf, rgmii, sdram, spi, uartf,
- uartlite]
-
- - description: For RT3352 SoC
- enum: [gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led,
- lna, mdio, pa, pcm gpio, pcm i2s, pcm uartf, rgmii, spi,
- spi_cs1, uartf, uartlite, wdg_cs1]
-
- - description: For RT5350 SoC
- enum: [gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led,
- pcm gpio, pcm i2s, pcm uartf, spi, spi_cs1, uartf,
- uartlite, wdg_cs1]
+ enum: [gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, mdio,
+ pcm gpio, pcm i2s, pcm uartf, rgmii, sdram, spi, uartf,
+ uartlite]
groups:
description:
@@ -72,17 +56,7 @@ patternProperties:
then:
properties:
groups:
- anyOf:
- - description: For RT3050, RT3052 and RT3350 SoCs
- enum: [i2c, jtag, mdio, rgmii, sdram, spi, uartf,
- uartlite]
-
- - description: For RT3352 SoC
- enum: [i2c, jtag, led, lna, mdio, pa, rgmii, spi, spi_cs1,
- uartf, uartlite]
-
- - description: For RT5350 SoC
- enum: [i2c, jtag, led, spi, spi_cs1, uartf, uartlite]
+ enum: [i2c, jtag, mdio, rgmii, sdram, spi, uartf, uartlite]
- if:
properties:
@@ -129,24 +103,6 @@ patternProperties:
groups:
enum: [jtag]
- - if:
- properties:
- function:
- const: led
- then:
- properties:
- groups:
- enum: [led]
-
- - if:
- properties:
- function:
- const: lna
- then:
- properties:
- groups:
- enum: [lna]
-
- if:
properties:
function:
@@ -156,15 +112,6 @@ patternProperties:
groups:
enum: [mdio]
- - if:
- properties:
- function:
- const: pa
- then:
- properties:
- groups:
- enum: [pa]
-
- if:
properties:
function:
@@ -219,15 +166,6 @@ patternProperties:
groups:
enum: [spi]
- - if:
- properties:
- function:
- const: spi_cs1
- then:
- properties:
- groups:
- enum: [spi_cs1]
-
- if:
properties:
function:
@@ -246,15 +184,6 @@ patternProperties:
groups:
enum: [uartlite]
- - if:
- properties:
- function:
- const: wdg_cs1
- then:
- properties:
- groups:
- enum: [spi_cs1]
-
allOf:
- $ref: pinctrl.yaml#
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt3352-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt3352-pinctrl.yaml
new file mode 100644
index 000000000000..c9bc6cfd834c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt3352-pinctrl.yaml
@@ -0,0 +1,243 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt3352-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT3352 Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
+ - Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
+
+description: |
+ Ralink RT3352 pin controller for RT3352 SoC.
+ The pin controller can only set the muxing of pin groups. Muxing individual
+ pins is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,rt3352-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+ additionalProperties: false
+
+ properties:
+ function:
+ description:
+ A string containing the name of the function to mux to the group.
+ enum: [gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, lna,
+ mdio, pa, pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1,
+ uartf, uartlite, wdg_cs1]
+
+ groups:
+ description:
+ An array of strings. Each string contains the name of a group.
+ maxItems: 1
+
+ required:
+ - groups
+ - function
+
+ allOf:
+ - if:
+ properties:
+ function:
+ const: gpio
+ then:
+ properties:
+ groups:
+ enum: [i2c, jtag, led, lna, mdio, pa, rgmii, spi, spi_cs1,
+ uartf, uartlite]
+
+ - if:
+ properties:
+ function:
+ const: gpio i2s
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: gpio uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: i2c
+ then:
+ properties:
+ groups:
+ enum: [i2c]
+
+ - if:
+ properties:
+ function:
+ const: i2s uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: jtag
+ then:
+ properties:
+ groups:
+ enum: [jtag]
+
+ - if:
+ properties:
+ function:
+ const: led
+ then:
+ properties:
+ groups:
+ enum: [led]
+
+ - if:
+ properties:
+ function:
+ const: lna
+ then:
+ properties:
+ groups:
+ enum: [lna]
+
+ - if:
+ properties:
+ function:
+ const: mdio
+ then:
+ properties:
+ groups:
+ enum: [mdio]
+
+ - if:
+ properties:
+ function:
+ const: pa
+ then:
+ properties:
+ groups:
+ enum: [pa]
+
+ - if:
+ properties:
+ function:
+ const: pcm gpio
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: pcm i2s
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: pcm uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: rgmii
+ then:
+ properties:
+ groups:
+ enum: [rgmii]
+
+ - if:
+ properties:
+ function:
+ const: spi
+ then:
+ properties:
+ groups:
+ enum: [spi]
+
+ - if:
+ properties:
+ function:
+ const: spi_cs1
+ then:
+ properties:
+ groups:
+ enum: [spi_cs1]
+
+ - if:
+ properties:
+ function:
+ const: uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: uartlite
+ then:
+ properties:
+ groups:
+ enum: [uartlite]
+
+ - if:
+ properties:
+ function:
+ const: wdg_cs1
+ then:
+ properties:
+ groups:
+ enum: [spi_cs1]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl {
+ compatible = "ralink,rt3352-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt5350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt5350-pinctrl.yaml
new file mode 100644
index 000000000000..f248202ce866
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt5350-pinctrl.yaml
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt5350-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT5350 Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
+ - Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
+
+description: |
+ Ralink RT5350 pin controller for RT5350 SoC.
+ The pin controller can only set the muxing of pin groups. Muxing individual
+ pins is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,rt5350-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+ additionalProperties: false
+
+ properties:
+ function:
+ description:
+ A string containing the name of the function to mux to the group.
+ enum: [gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led,
+ pcm gpio, pcm i2s, pcm uartf, spi, spi_cs1, uartf, uartlite,
+ wdg_cs1]
+
+ groups:
+ description:
+ An array of strings. Each string contains the name of a group.
+ maxItems: 1
+
+ required:
+ - groups
+ - function
+
+ allOf:
+ - if:
+ properties:
+ function:
+ const: gpio
+ then:
+ properties:
+ groups:
+ enum: [i2c, jtag, led, spi, spi_cs1, uartf, uartlite]
+
+ - if:
+ properties:
+ function:
+ const: gpio i2s
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: gpio uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: i2c
+ then:
+ properties:
+ groups:
+ enum: [i2c]
+
+ - if:
+ properties:
+ function:
+ const: i2s uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: jtag
+ then:
+ properties:
+ groups:
+ enum: [jtag]
+
+ - if:
+ properties:
+ function:
+ const: led
+ then:
+ properties:
+ groups:
+ enum: [led]
+
+ - if:
+ properties:
+ function:
+ const: pcm gpio
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: pcm i2s
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: pcm uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: spi
+ then:
+ properties:
+ groups:
+ enum: [spi]
+
+ - if:
+ properties:
+ function:
+ const: spi_cs1
+ then:
+ properties:
+ groups:
+ enum: [spi_cs1]
+
+ - if:
+ properties:
+ function:
+ const: uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: uartlite
+ then:
+ properties:
+ groups:
+ enum: [uartlite]
+
+ - if:
+ properties:
+ function:
+ const: wdg_cs1
+ then:
+ properties:
+ groups:
+ enum: [spi_cs1]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl {
+ compatible = "ralink,rt5350-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
--
2.37.2
[PATCH 18/20] dt-bindings: pinctrl: ralink: rt305x: split binding
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [PATCH 18/20] dt-bindings: pinctrl: ralink: rt305x: split binding
- From: arinc9.unal@xxxxxxxxx
- Date: Fri, 3 Mar 2023 03:28:47 +0300
- In-reply-to: <20230303002850.51858-1-arinc.unal@arinc9.com>
- References: <20230303002850.51858-1-arinc.unal@arinc9.com>
- Follow-Ups:
- Re: [PATCH 18/20] dt-bindings: pinctrl: ralink: rt305x: split binding
- From: Rob Herring
- Re: [PATCH 18/20] dt-bindings: pinctrl: ralink: rt305x: split binding
- References:
- Prev by Date: [PATCH 07/20] dt-bindings: pinctrl: ralink: improve bindings
- Next by Date: [PATCH 16/20] dt-bindings: pinctrl: mediatek: drop quotes from referred schemas
- Previous by thread: Re: [PATCH 07/20] dt-bindings: pinctrl: ralink: improve bindings
- Next by thread: Re: [PATCH 18/20] dt-bindings: pinctrl: ralink: rt305x: split binding
- Index(es):
 |