Use devm_clk_get_enabled() to simplify the code. Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> --- drivers/pinctrl/pinctrl-at91-pio4.c | 17 ++++------------- 1 file changed, 4 insertions(+), 13 deletions(-) diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c index 39b233f73e13..0aceb723f94c 100644 --- a/drivers/pinctrl/pinctrl-at91-pio4.c +++ b/drivers/pinctrl/pinctrl-at91-pio4.c @@ -1098,7 +1098,7 @@ static int atmel_pinctrl_probe(struct platform_device *pdev) if (IS_ERR(atmel_pioctrl->reg_base)) return PTR_ERR(atmel_pioctrl->reg_base); - atmel_pioctrl->clk = devm_clk_get(dev, NULL); + atmel_pioctrl->clk = devm_clk_get_enabled(dev, NULL); if (IS_ERR(atmel_pioctrl->clk)) { dev_err(dev, "failed to get clock\n"); return PTR_ERR(atmel_pioctrl->clk); @@ -1219,25 +1219,19 @@ static int atmel_pinctrl_probe(struct platform_device *pdev) i, irq); } - ret = clk_prepare_enable(atmel_pioctrl->clk); - if (ret) { - dev_err(dev, "failed to prepare and enable clock\n"); - goto clk_prepare_enable_error; - } - atmel_pioctrl->pinctrl_dev = devm_pinctrl_register(&pdev->dev, &atmel_pinctrl_desc, atmel_pioctrl); if (IS_ERR(atmel_pioctrl->pinctrl_dev)) { ret = PTR_ERR(atmel_pioctrl->pinctrl_dev); dev_err(dev, "pinctrl registration failed\n"); - goto clk_unprep; + goto irq_domain_remove_error; } ret = gpiochip_add_data(atmel_pioctrl->gpio_chip, atmel_pioctrl); if (ret) { dev_err(dev, "failed to add gpiochip\n"); - goto clk_unprep; + goto irq_domain_remove_error; } ret = gpiochip_add_pin_range(atmel_pioctrl->gpio_chip, dev_name(dev), @@ -1254,10 +1248,7 @@ static int atmel_pinctrl_probe(struct platform_device *pdev) gpiochip_add_pin_range_error: gpiochip_remove(atmel_pioctrl->gpio_chip); -clk_unprep: - clk_disable_unprepare(atmel_pioctrl->clk); - -clk_prepare_enable_error: +irq_domain_remove_error: irq_domain_remove(atmel_pioctrl->irq_domain); return ret; -- 2.34.1