Re: [PATCH v4 1/2] gpio: gpio-mlxbf3: Add gpio driver support

[Andy Shevchenko <andy.shevchenko@xxxxxxxxx>]

On Fri, Feb 17, 2023 at 11:27 PM Asmaa Mnebhi <asmaa@xxxxxxxxxx> wrote:
>
> Add support for the BlueField-3 SoC GPIO driver.
> This driver configures and handles GPIO interrupts. It also enables a user
> to manipulate certain GPIO pins via libgpiod tools or other kernel drivers.
> The usables pins are defined via the gpio-reserved-ranges property.

Probably

"gpio-reserved-ranges"

(in double quotes).

...

> +       depends on (MELLANOX_PLATFORM && ARM64 && ACPI) || (64BIT && COMPILE_TEST)

But do you really need the ACPI dependency? I don't see a single bit
of it in the driver.
(Yes, I know about IDs.)

Also, how 64BIT is needed for testing?

...

> +#include <linux/version.h>

I believe it's included automatically. Please, double check the header
inclusions to make sure you don't have some spurious ones in the list.

> +struct mlxbf3_gpio_context {
> +       struct gpio_chip gc;
> +
> +       /* YU GPIO block address */
> +       void __iomem *gpio_io;
> +
> +       /* YU GPIO cause block address */
> +       void __iomem *gpio_cause_io;
> +};

...

> +       int offset = irqd_to_hwirq(irqd);

It returns irq_hw_number_t IIRC. It's an unsigned type. Otherwise you
may have interesting effects.

...

> +       int offset = irqd_to_hwirq(irqd);

Ditto.

...

> +       raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags);
> +
> +       switch (type & IRQ_TYPE_SENSE_MASK) {
> +       case IRQ_TYPE_EDGE_BOTH:
> +               val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN);
> +               val |= BIT(offset);
> +               writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN);
> +               val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN);
> +               val |= BIT(offset);
> +               writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN);
> +               break;
> +       case IRQ_TYPE_EDGE_RISING:
> +               val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN);
> +               val |= BIT(offset);
> +               writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN);
> +               break;
> +       case IRQ_TYPE_EDGE_FALLING:
> +               val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN);
> +               val |= BIT(offset);
> +               writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN);
> +               break;
> +       default:

Dead lock starts here.

> +               return -EINVAL;
> +       }
> +
> +       raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags);

...

> +       irq_set_handler_locked(irqd, handle_simple_irq);

Why not using propert handler type (edge)?

...

> +static const struct irq_chip gpio_mlxbf3_irqchip = {
> +       .name = "MLNXBF33",
> +       .irq_set_type = mlxbf3_gpio_irq_set_type,
> +       .irq_enable = mlxbf3_gpio_irq_enable,
> +       .irq_disable = mlxbf3_gpio_irq_disable,
> +};

Seems missing two things (dunno if bgpio_init() helps with that):
- IMMUTABLE flag
- actual calls to enable and disable IRQs for internal GPIO library usage

See other drivers how it's done. There are even plenty of patches to
enable this thing separately.

...

> +static int
> +mlxbf3_gpio_probe(struct platform_device *pdev)

Doesn't it perfectly fit one line?

...

> +       npins = MLXBF3_GPIO_MAX_PINS_PER_BLOCK;
> +       device_property_read_u32(dev, "npins", &npins);

I don't see DT bindings for this property (being added in this
series). Is it already established one?

...

> +               girq->default_type = IRQ_TYPE_NONE;

Assigning handle_bad_irq() is missing.

-- 
With Best Regards,
Andy Shevchenko