Re: [PATCH] gpiolib: acpi: Add a ignore wakeup quirk for Clevo NH5xAx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Feb 13, 2023 at 12:30:08PM +0100, Werner Sembach wrote:
> Am 10.02.23 um 18:04 schrieb Andy Shevchenko:
> > On Fri, Feb 10, 2023 at 05:46:36PM +0100, Werner Sembach wrote:
> > > commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
> > > changed the policy such that I2C touchpads may be able to wake up the
> > > system by default if the system is configured as such.
> > > 
> > > However on Clevo NH5xAx/TUXEDO XA15 Gen10 there is a mistake in the ACPI
> > > tables that the TP_ATTN# signal connected to GPIO 10 is configured as
> > > ActiveLow and level triggered but connected to a pull up.
> > I'm not sure I understand the issue here. From what you say here it seems
> > correct ACPI description.
> TBH I copied the commit description from https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4cb786180dfb5258ff3111181b5e4ecb1d4a297b
> which is for a different device having the exact same problem.

Yeah, and I reviewed that and seems paid no attention to this detail.

So, ActiveLow + PullUp is the _right_ thing to do in ACPI.
The problem seems somewhere else.

Mario, can we have an access to the schematics of the affected pin to
understand better what's going on?

Or is that description missing some crucial detail?

> > > As soon as the
> > > system suspends the touchpad loses power and then the system wakes up.
> > > 
> > > To avoid this problem, introduce a quirk for this model that will prevent
> > > the wakeup capability for being set for GPIO 10.
> > I'm not against fixing this, but wouldn't be better to actually target the root
> > cause and have a different quirk? Or is it me who didn't get what is the root
> > cause?
> > 
> I missed to reference the original discussion while copying the description:
> https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1720627 (Note that
> it's a somewhat convoluted issue spanning multiple bugs when you scroll up
> from that particular linked comment, which are however irrelevant for this
> patch)
> 
> I'm not deep into how ACPI defined IRQ work so maybe not a good idea for me
> summing it up, as I might have misunderstood parts of it ^^

The GpioIo() and GpioInt() resources have gaps in them, due to this some
additional information is required or some heuristics is used to deduct
the settings.

All this is described in
https://www.kernel.org/doc/html/latest/firmware-guide/acpi/gpio-properties.html

> I added the other ones from there to the cc.

Thank you.

-- 
With Best Regards,
Andy Shevchenko





[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux