[PATCH 9/9] arm64: dts: qcom: sc7280-idp: add amp pin config function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Bindings expect each pin config to come with a "function" property:

  sc7280-crd-r3.dtb: pinctrl@f100000: amp-en-state: 'oneOf' conditional failed, one must be fixed:
    'function' is a required property
    'bias-pull-down', 'drive-strength', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index fa10dddadbb0..43e61a1aa779 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -732,6 +732,7 @@ &sdc2_data {
 &tlmm {
 	amp_en: amp-en-state {
 		pins = "gpio63";
+		function = "gpio";
 		bias-pull-down;
 		drive-strength = <2>;
 	};
-- 
2.34.1




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux